There are four connectors that I've never seen before, however this is my first time building a PC
There is also another connector a 4pin molex but it has connections on both sides, one is female the other is male. I don't know what this is for, but I assume this goes to the PSU's molex right?
Here are two pictures, one is the connectors the other is the control panel:
https://www.dropbox.com/s/91mk31mhc8lkc5p/20151223_123549.jpg?dl=0&preview=20151223_123549.jpg
https://www.dropbox.com/s/7mb8wk65otdc0sp/20151223_123731.jpg?dl=0&preview=20151223_123731.jpg
Other than this fan controller and that molex, I managed to connect everything the right way.
If I use this fan controller that came with the case I don't need to plug anything to the Motherboard right?
I have 3 fans, each of them has a molex with 2 pins and a 3 pin connector. Should I conenct these 3 pin connectors to those 2 pin ones( that you see on the picture) and the 2 pin molexes to the PSU's molexes?
Hope you understood me and thanks in advance!
There is also another connector a 4pin molex but it has connections on both sides, one is female the other is male. I don't know what this is for, but I assume this goes to the PSU's molex right?
Here are two pictures, one is the connectors the other is the control panel:
https://www.dropbox.com/s/91mk31mhc8lkc5p/20151223_123549.jpg?dl=0&preview=20151223_123549.jpg
https://www.dropbox.com/s/7mb8wk65otdc0sp/20151223_123731.jpg?dl=0&preview=20151223_123731.jpg
Other than this fan controller and that molex, I managed to connect everything the right way.
If I use this fan controller that came with the case I don't need to plug anything to the Motherboard right?
I have 3 fans, each of them has a molex with 2 pins and a 3 pin connector. Should I conenct these 3 pin connectors to those 2 pin ones( that you see on the picture) and the 2 pin molexes to the PSU's molexes?
Hope you understood me and thanks in advance!