Question about 2x6 pin connectors

TanevskiOptimus

Reputable
Dec 20, 2015
12
0
4,510
Ok so i got graphic card that requied 2x6pin but i got none on my PSU, i will go with molex converter but i got only one molex free, my question is can i get molex duplicator (http://e-loja.megabit.pt/161-large_default/cable-duplicator-voltage-molex-1-x-2.jpg) and put 6pins on each molex form that one free molex? It will work ?...and another question , i tried and put my card without 2x6pins but in properties it says that im on board card, it should be like that? Thx very much in advance.
 

clutchc

Titan
Ambassador


You can't go by total wattage. That is meaningless. The +12V rail determines the capability of the PSU. And cheap fake PSUs come with big total wattage numbers, but are not able to do the job. Worse, they will ruin the rest of the system when they fail. That's why I need to know the make/model of your PSU. Or post a pic of the name plate on the PSU.
 

clutchc

Titan
Ambassador


Yeah, I'm afraid that is one of those fake PSUs. With only a single +12v rail rated at a tiny 12 amp, it is realistically in the 200-250W category. That's why there are no 6 or 6+2 pin connectors. I doubt that card will even start using that PSU. And if it did, it would fry the PSU when it was under load. Plus, I've never even heard of Gembird.
 

clutchc

Titan
Ambassador


No, it only has 1 x 6 pin and 2 x small 18 amp +12v rails. The HD 6870 is a 151W card and needs a good quality 500W. That one is not a good quality 500W PSU. Where can you shop? Amazon (US)? Newegg?
Plus with only 4 GB of system memory, you may be waiting for virtual memory (the HDD) sometimes.
 

clutchc

Titan
Ambassador


Yes, that is about the lowest price unit I'd feel comfortable recommending. Although Johnny Guru gave this one passing marks too: http://www.newegg.com/Product/Product.aspx?Item=N82E16817438016
I've put 2 of these in budget builds and they are still going strong with decent size mid range cards.