New pc build no display

Vlad1156 · Dec 28, 2015

Hello guys i recently buyed An msi 760ga-p43 (fx) motherboard with an fx 6300 cpu and 4gb Ddr3 Corsair 1600mhz Cl9 Gpu r9 380.The problem is that the pc is starting and no display,I opened the case and the fans are spinnig and no beeps.Rams and cpu had been tested on other motherboard:Asrock980UD3 REV2.0 AND works fine.Cab you tell me what is the problem please?

PTOWN GAMER · Dec 28, 2015

Plug the Cable from the tv into the back of the Graphics card. not the motherboard

Vlad1156 · Dec 29, 2015

It's plugged into my gpu and my lcd monitor

PTOWN GAMER · Dec 29, 2015

Have you plugged the GPU into the First PCIe x16 slot on the motherboard?

Vlad1156 · Dec 29, 2015

I havr only 1PCIe slot

PTOWN GAMER · Dec 29, 2015

Vlad1156 :

hmm then im not sure, those 2 solutions are the most common. But you have done it all correctly, then now maybe its a faulty GPU, or maybe the motherboard PCIe slot is not working

Vlad1156 · Dec 29, 2015

Gpu works on the Asus p5q

PTOWN GAMER · Dec 29, 2015

Vlad1156 :

Then its probably the motherboard.

CountMike · Dec 29, 2015

That's an old chipset, maybe you don't have right BIOS to use Vishera cored processor.
http://www.msi.com/product/motherboard/support/760GA-P43-FX.html#support-cpu on the very right side of table is BIOS version for those processors.

Vlad1156 · Dec 29, 2015

I know that i have the first bios of the mobo original it wasn t updated cuz first time i had phenom cpu

CountMike · Dec 29, 2015

Well, according to that chart you need the newest BIOS version. You'll need older, compatible CPU to update BIOS.

Vlad1156 · Dec 29, 2015

Can i update the bios with a phenom xb59 that my friend have?

CountMike · Dec 29, 2015

Vlad1156 :

Any processor that would let you in the BIOS. That one should work with basic bios version.

tiny voices · Dec 29, 2015

The BIOS issue sounds correct. Update the BIOS and you should be good to go.

Vlad1156 · Dec 29, 2015

With xb59 still no boot.But fans spinning on cpu compatibility said Visher:Fx 6300 need bios v1,2 and xb59 v1.1.

CountMike · Dec 29, 2015

With latest BIOS it should work with both processors. You also have to reset BIOS every time you change processor.

tiny voices · Dec 29, 2015

What video cable are you using?

Vlad1156 · Dec 29, 2015

Vga cable with dvi adapter

tiny voices · Dec 29, 2015

That may well be the issue. Try a DVI cable.

Also, link your GPU.

computersbyray · Dec 30, 2015

Vlad1156 :

I have not heard you guys talk about programming the BIOS. Did you make sure the display choices are put to PCIE card and not on board in display mode?

computersbyray · Dec 30, 2015

I have not heard you guys talk about programming the BIOS. Did you make sure the display choices are put to PCIE 16x card and not on board in display mode?

computersbyray · Dec 30, 2015

I have not heard you guys talk about programming the BIOS. Did you make sure the display choices are put to PCIE 16x card and not on board in display mode?

Vlad1156 · Jan 2, 2016

Update:I just saw that my rams have voltage 1,65 and my motherboard 1.5 can this affect ?

tiny voices · Jan 2, 2016

That should not be an issue, but I guess it could be.

Vlad1156 · Jan 2, 2016

Is there a way to check if the Corsair XMS3 1600 MHZ CL 9 1,65 V are compatible with msi 760ga p43fx?

New pc build no display

Honorable

Reputable

Honorable

Reputable

Honorable

Reputable

Honorable

Reputable

Titan

Honorable

Titan

Honorable

Titan

Titan

Honorable

Titan

Titan

Honorable

Titan

Distinguished

Distinguished

Distinguished

Honorable

Titan

Honorable

Share this page