Right so last night I was using my of and working fine no issues and powered it off via shutdown. A few days ago I replaced all fans with silent wings 2 so I had to take the water cooling systems out (i have 2) so i could put them in. Did that and it worked fine, so I decided to wait a few days to get another part which was an m.2 ssd to put in before I re install the second watercooling loop. It all worked fine with all new parts last night but this morning when I opened the pc up to put the system back in when we tried to run the pump by powering it on nothing happened. Apart from a split second start up which instantly got cancelled. No post codes showed either on the motherboard. The motherboard has all power indicator leds on that usually are on when it's off. Even with clearing cmos removing ram and checking all cables are connected same problem occurs. Power supply is connected to all cables too and motherboard cables are seated correctly. No idea what's happened but would appreciate help
PC specs:
ASUS maximus vii formula
i7 4790k
ASUS gtx 960 strix
ASUS xonar phoebus
H100i
Samsung 850 Evo 250gb ssd
Samsung 840 Evo 120gb ssd
Crucial 2260 250gb m.2 ssd
Corsair RM750 psu
Custom watercooling system is for the vrm (unnecessary I know but yeah) 240mm radiator and hard tube pipes with a basic pump reservoir combo.
We have definitely not spelled any liquid in the system this morning !!! I was very careful with filling it and it's not even filled much yet.
Thank for you for any help in advance!!!
PC specs:
ASUS maximus vii formula
i7 4790k
ASUS gtx 960 strix
ASUS xonar phoebus
H100i
Samsung 850 Evo 250gb ssd
Samsung 840 Evo 120gb ssd
Crucial 2260 250gb m.2 ssd
Corsair RM750 psu
Custom watercooling system is for the vrm (unnecessary I know but yeah) 240mm radiator and hard tube pipes with a basic pump reservoir combo.
We have definitely not spelled any liquid in the system this morning !!! I was very careful with filling it and it's not even filled much yet.
Thank for you for any help in advance!!!