- May 24, 2014
- 40
- 0
- 4,530
When i use my desktop computer the monitor suddenly says that theres no signal from the hdmi
while all the other parts in the cpu are working
I've had this problem since many months i've been through a lot of sites on the internet for a solution . what i found was when the display turns off and the numlock key doesn't blink they say the motherboard is faulty , I've even replaced the motherboard on warranty .The problem still persists.And I then replaced all the parts except my HDD on warranty its worked good for few hours and again started to fail . i've been checking all power options and all but still the pc stops in middle while working on it ,sometimes it stops as soon as it starts .
some people say that it is overheating ive checked my temperatures and all i think theyre all fine
They say its a problem in the PSU but the psu has also been replaced .
Well, The stock cable given for my psu has stopped working , I started using a different cable
the stock cable had 5A and 200-240v on it
the other cable has 10A 250v on it
but i guess it never interrupted my computer
The configouration of my pc
AMD FX8350
Cooler Master Hyper 212 Evo x
ASRock 970 Extreme 4
Transcend 8gb 1333Mhz
Nvidia GT 610 Zotac synergy edition
Corsair vs550 PSU
Seagate 160gb HDD
WD PASSPORT 1 TB
while all the other parts in the cpu are working
I've had this problem since many months i've been through a lot of sites on the internet for a solution . what i found was when the display turns off and the numlock key doesn't blink they say the motherboard is faulty , I've even replaced the motherboard on warranty .The problem still persists.And I then replaced all the parts except my HDD on warranty its worked good for few hours and again started to fail . i've been checking all power options and all but still the pc stops in middle while working on it ,sometimes it stops as soon as it starts .
some people say that it is overheating ive checked my temperatures and all i think theyre all fine
They say its a problem in the PSU but the psu has also been replaced .
Well, The stock cable given for my psu has stopped working , I started using a different cable
the stock cable had 5A and 200-240v on it
the other cable has 10A 250v on it
but i guess it never interrupted my computer
The configouration of my pc
AMD FX8350
Cooler Master Hyper 212 Evo x
ASRock 970 Extreme 4
Transcend 8gb 1333Mhz
Nvidia GT 610 Zotac synergy edition
Corsair vs550 PSU
Seagate 160gb HDD
WD PASSPORT 1 TB
Facebook
Twitter
Instagram