Slow boot after resetting BIOS

Noron596

Reputable
Dec 25, 2015
2
0
4,510
After trying to find the best settings to overclock my CPU i have screwed up to the point where my PC didnt even boot. So what I did was remove and re-insert the CMOS battery in order to reset my BIOS settings. The moment I pressed the power button the computer turns on but it keeps beeping and shuffling around 7 times before booting. Afterwards the pc was stuck on the windows logo and kept beeping and shuffling the same way it did before booting. 30 seconds later the logo fades away and windows start up as usual, everything is fine the way it was.

From now on this beeping and shuffling shenanigans happens every time i turn on the pc. I tried to load the optimized defaults in my bios but that didint help. I don't want to tamper with the BIOS settings as I am not an expert in this field so any help would be appreciated :)
 
Solution
well, worst case you burned some parts in your proceccor and have to hope it in the warrently.
otherwise search for a quickboot option. also, if you bought 1866Mhz RAM modules, it automatically downgrades till 1333Mhz
try putting it at 1866.

Mike

Mkarmelk

Reputable
Sep 13, 2015
55
0
4,660
well, worst case you burned some parts in your proceccor and have to hope it in the warrently.
otherwise search for a quickboot option. also, if you bought 1866Mhz RAM modules, it automatically downgrades till 1333Mhz
try putting it at 1866.

Mike
 
Solution