- Jul 6, 2011
- 7
- 0
- 18,510
Need help with graphics cards. Whenever I start up a Sniper Elite 3 using crossfire my computer restarts for some reason it as all the latest AMD drivers and Windows updates.
The games will run in single monitor mode using crossfire but when I change to Eyefinity and run a game the computer restarts. I have tried everything possible and at a loss it runs games fine with one graphics card.
I've copied the information from Speccy and pasted it below and hopefully this might help someone spot the problem.
My Power supply is Corsair CX750 Builder Series CX 750W ATX/EPS 80 PLUS Bronze PSU I know it's powerful enough because other game run.
I use the two PCI Express X16 slots. The North bridge is X16 and South bridge is X4 and might be the issu. It's either the processor is not fast enough or the motherboard is the problem.
My cooling system for the processor is a Corsair CW-9060007-WW Hydro Series H60 High Performance 120 mm Rad All-in-One Liquid CPU Cooler.
I have also found a driver problem with the AMD crossfire mode when using Eyefinity.
If I switch Mantle on in Sniper Elite 3 it work without any problems
Operating System
Windows 10 Pro 64-bit
CPU
AMD A10-6800K 45 °C
Richland 32nm Technology
RAM
16.0GB Dual-Channel DDR3 @ 799MHz (11-11-12-28)
Motherboard
Gigabyte Technology Co. Ltd. G1.Sniper A88X-CF (P0) 31 °C
Graphics
BenQ GL2250H (1920x1080@60Hz)
BenQ GL2250H (1920x1080@60Hz)
BenQ GL2250H (1920x1080@60Hz)
2048MB ATI AMD Radeon R9 200 Series (XFX Pine Group) 40 °C
2048MB ATI AMD Radeon R9 200 Series (XFX Pine Group) 39 °C
CrossFire Disabled
Storage
931GB Seagate ST1000DM003-1ER162 (SATA) 29 °C
931GB Seagate ST1000DL002-9TT153 (SATA) 30 °C
149GB Seagate ST3160815AS (SATA) 35 °C
465GB Western Digital WDC WD5000AAKS-75V0A0 (SATA) 32 °C
465GB Western Digital WDC WD5000AAKX-60U6AA0 (SATA) 32 °C
Optical Drives
ATAPI DVD A DH16AASH
TSSTcorp CDDVDW SH-224DB
Audio
Realtek High Definition Audio
The games will run in single monitor mode using crossfire but when I change to Eyefinity and run a game the computer restarts. I have tried everything possible and at a loss it runs games fine with one graphics card.
I've copied the information from Speccy and pasted it below and hopefully this might help someone spot the problem.
My Power supply is Corsair CX750 Builder Series CX 750W ATX/EPS 80 PLUS Bronze PSU I know it's powerful enough because other game run.
I use the two PCI Express X16 slots. The North bridge is X16 and South bridge is X4 and might be the issu. It's either the processor is not fast enough or the motherboard is the problem.
My cooling system for the processor is a Corsair CW-9060007-WW Hydro Series H60 High Performance 120 mm Rad All-in-One Liquid CPU Cooler.
I have also found a driver problem with the AMD crossfire mode when using Eyefinity.
If I switch Mantle on in Sniper Elite 3 it work without any problems
Operating System
Windows 10 Pro 64-bit
CPU
AMD A10-6800K 45 °C
Richland 32nm Technology
RAM
16.0GB Dual-Channel DDR3 @ 799MHz (11-11-12-28)
Motherboard
Gigabyte Technology Co. Ltd. G1.Sniper A88X-CF (P0) 31 °C
Graphics
BenQ GL2250H (1920x1080@60Hz)
BenQ GL2250H (1920x1080@60Hz)
BenQ GL2250H (1920x1080@60Hz)
2048MB ATI AMD Radeon R9 200 Series (XFX Pine Group) 40 °C
2048MB ATI AMD Radeon R9 200 Series (XFX Pine Group) 39 °C
CrossFire Disabled
Storage
931GB Seagate ST1000DM003-1ER162 (SATA) 29 °C
931GB Seagate ST1000DL002-9TT153 (SATA) 30 °C
149GB Seagate ST3160815AS (SATA) 35 °C
465GB Western Digital WDC WD5000AAKS-75V0A0 (SATA) 32 °C
465GB Western Digital WDC WD5000AAKX-60U6AA0 (SATA) 32 °C
Optical Drives
ATAPI DVD A DH16AASH
TSSTcorp CDDVDW SH-224DB
Audio
Realtek High Definition Audio
Facebook
Twitter
Instagram