Newly built PC wont fully start up

Toggle sidebar Toggle sidebar
I

Infernius

Honorable
Aug 1, 2013
6
0
10,510
Newly built PC turns on for 5-7 seconds, fans start spinning, then it shuts off for 1 second before starting up again and repeating cycle until psu is turned off.

PC Specs

Intel Core i5-6600K 3.5GHz Quad-Core Processor

CRYORIG H7 49.0 CFM CPU Cooler

Gigabyte GA-Z170XP-SLI ATX LGA1151 Motherboard

G.Skill Ripjaws V Series 16GB (2 x 8GB) DDR4-2133 Memory

Samsung 850 EVO-Series 250GB 2.5" Solid State Drive

Seagate Barracuda 1TB 3.5" 7200RPM Internal Hard Drive

Sapphire Radeon R9 390 8GB Nitro Video Card

NZXT S340 (Black) ATX Mid Tower Case

EVGA 750W 80+ Gold Certified Fully-Modular ATX Power Supply
 
Sort by date Sort by votes
I

Infernius

Honorable
Aug 1, 2013
6
0
10,510


Problem persists
 
Upvote 0 Downvote
badboyrog2

badboyrog2

Distinguished
Mar 5, 2014
6,953
0
18,960
``Problem persists ``
look weird but its a good news

so maybe a short somewhere ... did you install the standoff correcly and at the good place??
did you install the cpu correctly or bent pins and thermal paste well applied ??
did you tried with only one ram at the time?
your psu worked well???
 
Upvote 0 Downvote
I

Infernius

Honorable
Aug 1, 2013
6
0
10,510


Reinstalled standoffs and am pretty sure they're all in place. thermal paste well applied, tried with one ram, PSU apears to be working but it may not be providing enoguh power, i don't really know.

 
Upvote 0 Downvote
J

joshbgosh10592

Honorable
Apr 12, 2012
40
0
10,540
Kinda sounds like the BIOS is freaking out. Are you able to do anything, maybe boot into the BIOS to monitor?
If not, usually the CPU overheating would just cause it to power off, and not cycle.. Have you tried only CPU, 1 stick of RAM (multiple slots), and onboard graphics only? Disconnect drives and graphics card.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom