Hello! I built my first this this weekend and I'm having some problems. When both of the RAM sticks are installed I get nothing, the computer boots and it sounds fine but I don't see anything on the screen and the EZ Debug LEDs for DRAM is lit and every 5 seconds or so it turns off and then the CPU LED turns on for 1 second and then it repeats, the DRAM LED turns on for 5 seconds et.c. But the weird this is that everything works fine with just 1 stick of RAM, I'm using the computer right now and I have been gaming on it since I built it without any problems, I have also checked the temperature and everything is fine. I have tried both RAMs in slot 1 and both works, I have also tried every combination in the 4 slots, but I get the same results.
I googled and I found that there are some people with similar issues and people recommended that you turn up the voltage for the RAM by 0.06, so I did that but it still doesn't work, I have also enabled XMP. I think it might be the PSU because it's the oldest part in the PC and it's not that powerful. Here are the specs:
NVIDIA GeForce GTX 760
Intel Core i5-6600 @ 3.30 GHz
Kingston HyperX Fury DDR4-2666 16GB (2x8GB, but only using 1)
MSI Z170A GAMING PRO
Antec VP550P 550W
I googled and I found that there are some people with similar issues and people recommended that you turn up the voltage for the RAM by 0.06, so I did that but it still doesn't work, I have also enabled XMP. I think it might be the PSU because it's the oldest part in the PC and it's not that powerful. Here are the specs:
NVIDIA GeForce GTX 760
Intel Core i5-6600 @ 3.30 GHz
Kingston HyperX Fury DDR4-2666 16GB (2x8GB, but only using 1)
MSI Z170A GAMING PRO
Antec VP550P 550W
Facebook
Twitter
Instagram