After upgrading to Windows 10 from 7, my pc will only boot with one stick of 8G ram; With windows 7 although not all was used I had 4 banks with Ripsaws DDR3 1600 8Gx4 and it was running well. If I install more than 8G it stalls and never boots.
Update: I set my mem speed to the lowest setting, uninstalled Asus suite and added 8 G; Now my system shows 16G installed but only 7.9 usable.
So, Im using 24G the remaining stick that doesnt get read has an RMA.
My pc was running with 32G installed with windows 7, only 16G usable; I didnt think one was bad.
Update: I set my mem speed to the lowest setting, uninstalled Asus suite and added 8 G; Now my system shows 16G installed but only 7.9 usable.
So, Im using 24G the remaining stick that doesnt get read has an RMA.
My pc was running with 32G installed with windows 7, only 16G usable; I didnt think one was bad.