So I'm trying to build a pc, and I'm having a little trouble with my front panel connection. My case has two POWER SW plugs and no RESET SW plug, even though the manual says it should have one of each. I was wondering if this will be a problem, or if it was likely labeled incorrectly and will still work.
Edit: Case is Thermaltake Core V21
http://www.newegg.com/Product/Product.aspx?Item=N82E16811133274&cm_re=thermaltake_core_v21-_-11-133-274-_-Product
My other problem is that I'm using a motherboard that was formerly in a Lenovo H520 desktop, and the front panel connections aren't labeled. Does anyone know where to find a diagram for this? There were a couple threads on this before, but on one of them the picture that was chosen as a solution cannot be found, and on the other the poster found his own solution but did not share it. The motherboard is ECS CiH61mi.
Thanks for any help anybody can offer.
Edit: Case is Thermaltake Core V21
http://www.newegg.com/Product/Product.aspx?Item=N82E16811133274&cm_re=thermaltake_core_v21-_-11-133-274-_-Product
My other problem is that I'm using a motherboard that was formerly in a Lenovo H520 desktop, and the front panel connections aren't labeled. Does anyone know where to find a diagram for this? There were a couple threads on this before, but on one of them the picture that was chosen as a solution cannot be found, and on the other the poster found his own solution but did not share it. The motherboard is ECS CiH61mi.
Thanks for any help anybody can offer.
Facebook
Twitter
Instagram