So the other day I made a post about how my WD Black 2tb hard drive couldn't be initialized under the disk management section of windows 10. I kept receiving errors and my pc was reading the hard drive as having 0.0gb. In the post we determined that the drive was dead.
http://www.tomshardware.com/answers/id-2943278/brand-black-hdd-initializing.html
I went to the pc shop and sent in the old one for repairs etc and in the mean time I purchased another WD Black 2tb hard drive. When I connected it in to my motherboard i am getting the exact same issues as before. I find it hard to believe that both the drives were dead on delivery and that the problem must lay somewhere else. Any suggestions would greatly be appreciated!
http://www.tomshardware.com/answers/id-2943278/brand-black-hdd-initializing.html
I went to the pc shop and sent in the old one for repairs etc and in the mean time I purchased another WD Black 2tb hard drive. When I connected it in to my motherboard i am getting the exact same issues as before. I find it hard to believe that both the drives were dead on delivery and that the problem must lay somewhere else. Any suggestions would greatly be appreciated!
Facebook
Twitter
Instagram