Increase performance in Games/Rendering 3d models $1100-1500 CAD

1 h34r7 pc

Reputable
Jun 1, 2014
3
0
4,510
Hi everyone!@
I've been having trouble deciding on what to do in terms of upgrading. Instead of wracking my brain over this for much longer I decided to ask the community for advice.
Do I spend it all on a 980TI? Build a Haswell-E and Reuse my GPU for another year or so? I'm just looking for some insight.

Approximate Purchase Date: e.g.: ASAP

Budget Range: $1100 CAD:pfff: maybe up to $1500

System Usage from Most to Least Important: Gaming @ 1080p144hz, Rendering 3d models in Vue
Are you buying a monitor: / No

Parts to Upgrade: This is where I'm stuck. 8350@4.8, 16gb Mushkin Blackline, Asus Sabertooth 990fx R2.0, HIS Radeon 7970 reference.
Will be reusing Seasonic Platinum Series 860w, 500gb Samsung EVO, my WD Red, Black drives.
Corsair 550D with silencing covers OFF (on if new build is cool enough)
Do you need to buy OS: No

Preferred Website(s) for Parts: Usually use NCIX but no preference.

Location: City, State/Region, Country - Winnipeg, Canada

Parts Preferences: Seasonic, Nvidia are my only preferred brands
Overclocking: Usually, but not a must.
SLI or Crossfire: Love this tech. but going with single card for cool n quiet.
Your Monitor Resolution: 1080p144hz, planning on upgrading to 2k w/ g-sync within 2016
Additional Comments: Ideally I'm looking to upgrade for performance but the quieter the pc the better.

And Most Importantly, Why Are You Upgrading: I've got the itch. My main pc is a space heater, and want something near silent opposed to my jet engine. I was planning on waiting until Skylake-E/Pascal but with the declining CAD I doubt I'll be in a position to be building a new PC in 2017. In some games Im doing fine but others I have to drastically scale down settings to get close to 144fps.

TL:DR Too hot, too power hungry, too noisy and to top it off I have that enthusiast upgrade itch that I'm dying to scratch. Technically my system is fine. but the aforementioned by-products of the system are getting on my nerves. Heating my house is fine in -40C weather but come summertime it's game over.
 
Solution
For both gaming and non-gaming the 8350 is still a very capable CPU, especially OC'd to 4.8GHz. I'd say get an EK Predator AIO cooler (unless you have an equivalent AIO) and drop the rest into a GPU. For the GPU I'd recommend Asus or MSI for silence.

On top of that you could also grab a couple of Jetflo fans (with color of choice) for your case's bottom and rear fan mounts. Even at low RPM Jetflo fans can deliver the airflow that cheap fans deliver at max.
For both gaming and non-gaming the 8350 is still a very capable CPU, especially OC'd to 4.8GHz. I'd say get an EK Predator AIO cooler (unless you have an equivalent AIO) and drop the rest into a GPU. For the GPU I'd recommend Asus or MSI for silence.

On top of that you could also grab a couple of Jetflo fans (with color of choice) for your case's bottom and rear fan mounts. Even at low RPM Jetflo fans can deliver the airflow that cheap fans deliver at max.
 
Solution

1 h34r7 pc

Reputable
Jun 1, 2014
3
0
4,510
thanks for your reply. its the answer I was looking for. my aio is an KÜHLER H2O 920 ... it gets the job done but extremely loud. Im using stock corsair fans for the case and left them because they're quiet. I'll take your advice, and work on configuring the cooling/fans and get as much of a gpu as I can after that. The noise/heat was my main issue so thanks again.
 


Yeah invest in a dual rad EK Predator AIO and mount it at the top of your case. Those have pretty much the same parts used in custom watercooling as well as EK's amazing Vardar fans. Very good cooling AND pretty much silent. Then just dump the rest of the budget into a GPU. Although BEFORE you get a Predator make sure there's at least 68mm of space between the top fan mounts and the motherboard (that's the height of the EK Predator with the fans).