I'm of bad luck

Toggle sidebar Toggle sidebar
S

Sean Hyjek

Honorable
Jul 29, 2013
4
0
10,510
I have a asus Maximus VIII hero with a i7 6700k and 16 gb 3000 MHz corsair dominator ram and I keep getting the 99 code Ive tried everything I could find on google
 
Solution
lucas_7_94
Something is not connected to your motherboard propertly, i will recommend booting up with only 1 stick of RAM.

If you checked everything and still don't works, remove the CPU and inspect the socket for bent pins
Sort by date Sort by votes
lucas_7_94

lucas_7_94

Admirable
Dec 16, 2015
2,898
1
7,960
Something is not connected to your motherboard propertly, i will recommend booting up with only 1 stick of RAM.

If you checked everything and still don't works, remove the CPU and inspect the socket for bent pins
 
Upvote 0 Downvote
Solution
S

Sean Hyjek

Honorable
Jul 29, 2013
4
0
10,510
So I took out the cpu and looked and all the pins were ok put it all back cleared the cmos and it starts going through turns off then turns back on goes through again stalls on b2 then goes to 99 and stays their
 
Upvote 0 Downvote
JimF_35

JimF_35

Distinguished
Dec 27, 2010
1,725
0
20,460
I would do like Lucas suggested. Pull every thing out of your case, set it up on your motherboard box with only one RAM chip, No Graphics Card (Plug direct to motherboard) and no other peripherals other than a keyboard and mouse. Then go from there.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom