Guys! I've been struggling to find the correct 4 GB ram for my motherboard.I have the "INTEL DH55PJ" motherboard and it's stated clear that it supports up to 8gb of ram. My motherboard has only two ram slots.
I currently have installed (2+2=4GB) in my motherboard,it works without any problem.I want to upgrade to 8GB RAM (i.e 4+4=8GB). I've so far tried two 4gb 1333 mhz ram and even one 4gb 1600mhz ram from corsair and kingston in the last few months.Everytime i get the same problem the computer boots splashes the intel motherboard screen then comes the windows logo screen then *BOOM* it just stops and restarts again and it goes on and on in a loop.It's just frustrating.
i've tried using the new 4gb ram as a standalone and also coupled with another 2gb still the same problem.
OS:Windows 7 Ultimate 64 bit
Processor: Intel Core i3 540 3.07 Ghz
I've already tried multiple things including bios update,cmos battery clearing and bios resetting etc.still no solution.everything is up and running when i switch back to the 2+2 Ram setup.
Someone pls kindly help me to figure this out
This is the support page for my motherboard's memory configuration from intel. May be i'm doing something wrong in choosing my new 4+4 stick pls help me!
http://www.intel.com/content/www/us/en/support/boards-and-kits/desktop-boards/000006049.html
Can someone please explain me the tabular column below the "Supported memory Configurations" in the above webpage,and tell what type of 4gb ram should i buy "Single Sided or Doubled sided?"
Thanks in advance
I currently have installed (2+2=4GB) in my motherboard,it works without any problem.I want to upgrade to 8GB RAM (i.e 4+4=8GB). I've so far tried two 4gb 1333 mhz ram and even one 4gb 1600mhz ram from corsair and kingston in the last few months.Everytime i get the same problem the computer boots splashes the intel motherboard screen then comes the windows logo screen then *BOOM* it just stops and restarts again and it goes on and on in a loop.It's just frustrating.
i've tried using the new 4gb ram as a standalone and also coupled with another 2gb still the same problem.
OS:Windows 7 Ultimate 64 bit
Processor: Intel Core i3 540 3.07 Ghz
I've already tried multiple things including bios update,cmos battery clearing and bios resetting etc.still no solution.everything is up and running when i switch back to the 2+2 Ram setup.
Someone pls kindly help me to figure this out
This is the support page for my motherboard's memory configuration from intel. May be i'm doing something wrong in choosing my new 4+4 stick pls help me!
http://www.intel.com/content/www/us/en/support/boards-and-kits/desktop-boards/000006049.html
Can someone please explain me the tabular column below the "Supported memory Configurations" in the above webpage,and tell what type of 4gb ram should i buy "Single Sided or Doubled sided?"
Thanks in advance
Facebook
Twitter
Instagram