Reset kernel power 41 error at low load installing new fx8320, old 955 reinstalled and problems solved.

Toggle sidebar Toggle sidebar
J

Juan_WF

Reputable
Jan 29, 2016
13
0
4,510
Hi, My specs are

Six year corsair psu vx550w
Gigabyte ga-990xa-ud3 r1.0 (F13 bios, total supported fx chips)
Gigabyte gtx760oc 4gb
Phenom II 955@3.7
FX8320 stock.(stock values and automatic voltage)

When i bought new fx processor to update my pc, i installed it and i began to have restarts randomly al low load. Running prime95 or 3dmark with no errors for 2 hours.

I reinstalled Windows and problem isn´t solved then i reinstalled my old phenom II 955 at same values and all is working fine again.

Anyone can help me? I figured that is a cpu problem, it may be defective, psu and mobo are running fine with old cpu
 
Solution
maugusto
Put your new CPU in the socket, then go to the BIOS and do a factory reset, then go windows. if still crash test with the AMD cool and quiet option disabled in BIOS

BTW. don't install Gigabyte software tools to monitor/change voltages, or other stuff in your system, just install drivers. Gigabyte tools cause problems in some FX cpus
Sort by date Sort by votes
maugusto

maugusto

Reputable
Jan 2, 2016
441
0
5,160
Put your new CPU in the socket, then go to the BIOS and do a factory reset, then go windows. if still crash test with the AMD cool and quiet option disabled in BIOS

BTW. don't install Gigabyte software tools to monitor/change voltages, or other stuff in your system, just install drivers. Gigabyte tools cause problems in some FX cpus
 
Upvote 0 Downvote
Solution
J

Juan_WF

Reputable
Jan 29, 2016
13
0
4,510


I cleared cmos before install new fx cpu , all automatic no oc. When problem startet I reinstalled windows with no drivers or gb apps and crashed too, 30 min after instalation. QNQ isn't enabled when tested but in my 955 works fine
 
Upvote 0 Downvote
J

Juan_WF

Reputable
Jan 29, 2016
13
0
4,510


Thanks for your help but my mobo hasn´t LLC :S Maybe mobo problem? But 955 Works fine and bios rev support fx8350
 
Upvote 0 Downvote
J

Juan_WF

Reputable
Jan 29, 2016
13
0
4,510


F14e is a beta bios for new fx9xxx and f-8370 and fx-8xxxe, my mobo get fully support for 8320 on f13. Don´t think that Works but thank you.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom