Hi Folks. I'm new on here so go easy. I have a moderate knowledge of computing but haven't been able to sort this problem. If there's a solution somewhere on here please point me to right direction. My windows 7 laptop hdd went pop so I installed a new one no problem. However, i'm trying to access the files on the old hdd with no luck. I have changed the permissions and ownership with success but still unable to access the hdd. I have the hdd powered up and connected through a usb port. It shows up as F drive and has been named recovery. If I click on the drive I can see from the properties there is over 4 gig of data within. I can see within the drive a folder called recovery and an xml document called ADRInfos which is an xml document. I can access the xml file but it means nothing to me. The recovery folder shows it about 1.56mb of data but i can't see in the folder. It seems the root F drive which contains the folder and xml file has about 4gb of data within which I can't access. Any help with accessing this would be gratefully received. Thanks in advance.
-
T-Mobile Home Internet: Revisiting 5G connectivity for the home after two years
-
Multi-million dollar Cheyenne supercomputer auction ends with $480,085 bid — buyer walked away with 8,064 Intel Xeon Broadwell CPUs, 313TB DDR4-2400 ECC RAM, and some water leaks
old windows 7 hdd inaccessible
- Thread starter Seth_7
- Start date
Solution
Hey there, Seth. Welcome to the community! 
What exactly do you mean by "went pop"? I mean, if the drive itself has some sort of issues, physical or otherwise, this might be preventing you from accessing the data and not permissions (unless you've had it password protected).
You could try to access the files via Ubuntu Live USB (this is basically a freeware, bootable, portable version of Linux), to see if the drive is properly recognized and if you can get to your data. Another option would be data recovery software like the programs from these suggestions: http://www.tomshardware.co.uk/forum/id-1644496/lost-data-recovery.html and http://pcsupport.about.com/od/filerecovery/tp/free-file-recovery-programs.htm.
Hope that helps. Please...
What exactly do you mean by "went pop"? I mean, if the drive itself has some sort of issues, physical or otherwise, this might be preventing you from accessing the data and not permissions (unless you've had it password protected).
You could try to access the files via Ubuntu Live USB (this is basically a freeware, bootable, portable version of Linux), to see if the drive is properly recognized and if you can get to your data. Another option would be data recovery software like the programs from these suggestions: http://www.tomshardware.co.uk/forum/id-1644496/lost-data-recovery.html and http://pcsupport.about.com/od/filerecovery/tp/free-file-recovery-programs.htm.
Hope that helps. Please...
Boogieman_WD
Judicious
- Jul 31, 2014
- 6,050
- 2
- 35,960
Hey there, Seth. Welcome to the community!
What exactly do you mean by "went pop"? I mean, if the drive itself has some sort of issues, physical or otherwise, this might be preventing you from accessing the data and not permissions (unless you've had it password protected).
You could try to access the files via Ubuntu Live USB (this is basically a freeware, bootable, portable version of Linux), to see if the drive is properly recognized and if you can get to your data. Another option would be data recovery software like the programs from these suggestions: http://www.tomshardware.co.uk/forum/id-1644496/lost-data-recovery.html and http://pcsupport.about.com/od/filerecovery/tp/free-file-recovery-programs.htm.
Hope that helps. Please let me know how it goes.
Boogieman_WD
What exactly do you mean by "went pop"? I mean, if the drive itself has some sort of issues, physical or otherwise, this might be preventing you from accessing the data and not permissions (unless you've had it password protected).
You could try to access the files via Ubuntu Live USB (this is basically a freeware, bootable, portable version of Linux), to see if the drive is properly recognized and if you can get to your data. Another option would be data recovery software like the programs from these suggestions: http://www.tomshardware.co.uk/forum/id-1644496/lost-data-recovery.html and http://pcsupport.about.com/od/filerecovery/tp/free-file-recovery-programs.htm.
Hope that helps. Please let me know how it goes.
Boogieman_WD
Rookie_MIB
Distinguished
- Jul 27, 2013
- 1,970
- 10
- 20,965
Here's the kicker. The recovery partition is the one that the laptop manufacturers build into the HDD file system to allow for reinstalling the OEM windows installation (wiping the main partition in the process) and also contains the other files for potentially fixing boot problems with the PC. It's the equivalent of a recovery CD, just on the HDD instead. It has none of your files - those were on the other partition.
What you could do, is get into the disk partitioning and see what you can find out about the drive.
Open a command prompt (Start - Run - in the box, type CMD and hit enter).
In the command prompt type 'diskpart' - hit enter.
type 'list disk' hit enter.
This will show the physical disks. Assuming only your new HDD in the system, and the 'broken' disk, the new HDD should be disk 0, the other should be disk 1. You might be able to tell from the size.
type 'select disk 1' - hit enter.
type 'list partition' - hit enter.
This will show the available partitions on the drive. The main partition where your data was should be partition 1, the recovery should be partition 2. If both partitions show up, then they should be mountable. If you only show one partition, the recovery partition, the data is most likely gone and you're hosed. If you show both partitions...
type 'select partition 1' hit enter.
type 'assign' hit enter.
This selects the partition where your data should be, and 'assign' tells windows to find and give it a drive letter. If it assigns a drive letter, you should be able to then access the data.
Let us know how this goes.
What you could do, is get into the disk partitioning and see what you can find out about the drive.
Open a command prompt (Start - Run - in the box, type CMD and hit enter).
In the command prompt type 'diskpart' - hit enter.
type 'list disk' hit enter.
This will show the physical disks. Assuming only your new HDD in the system, and the 'broken' disk, the new HDD should be disk 0, the other should be disk 1. You might be able to tell from the size.
type 'select disk 1' - hit enter.
type 'list partition' - hit enter.
This will show the available partitions on the drive. The main partition where your data was should be partition 1, the recovery should be partition 2. If both partitions show up, then they should be mountable. If you only show one partition, the recovery partition, the data is most likely gone and you're hosed. If you show both partitions...
type 'select partition 1' hit enter.
type 'assign' hit enter.
This selects the partition where your data should be, and 'assign' tells windows to find and give it a drive letter. If it assigns a drive letter, you should be able to then access the data.
Let us know how this goes.
hang-the-9
Titan
- Mar 25, 2010
- 60,387
- 1,081
- 152,940
If all you see is the recovery folder, that is only the restore partition from the OEM setup (so when you select to do a factory reset, that is where the laptop reads the Windows setup from). If this was your original hard drive you should be seeing a lot more than 4 gb of data and a lot more than just a recovery folder. Did you do anything to the original hard drive before you replaced it?
TRENDING THREADS
-
News Apple debuts M4 processor in new iPad Pros with 38 TOPS on neural engine- Started by Admin
- Replies: 61
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session
- Started by Admin
- Replies: 54
-
Question Sapphire RX 5700 XT Nitro+ is not working in main PCIe slot ?
- Started by digows
- Replies: 24
-
Question I replaced my broken Mother Board and now my windows wont start- Started by Crystal_B
- Replies: 16
-
Facebook
Twitter
Instagram