Hello all,
So here is my build
Motherboard: Asrock x99 Extreme11
CPU: Intel Core i7-5930k
RAM: HyperX Fury DDR4 8gb (x4)
VGA: EVGA TitanX SC 12gb (x2)
So the issue that I am having is that after I installed the second VGA card, and using Nvidia Inspection tool, it turned out that the second card is running as x8 (not x16 as the MB supports, the first card is running x16 tho)
I followed the Motherboard instruction manual while installing the cards to achieve the dual x16 configuration; one VGA in PCIe1 & the other in PCIe4. I Used the SLI bridge that was provided with the motherboard, all drivers for the motherboard and the cards are up to date.
I have tried running both cards separately and both were performing well under benchmarking (with almost identical results)
I am satisfied with the performance of my computer right now, But I wouldn't mind juicing out every drop that I can get. So if someone out there can help me figure this issue, I would be thankful.
Have a good day
So here is my build
Motherboard: Asrock x99 Extreme11
CPU: Intel Core i7-5930k
RAM: HyperX Fury DDR4 8gb (x4)
VGA: EVGA TitanX SC 12gb (x2)
So the issue that I am having is that after I installed the second VGA card, and using Nvidia Inspection tool, it turned out that the second card is running as x8 (not x16 as the MB supports, the first card is running x16 tho)
I followed the Motherboard instruction manual while installing the cards to achieve the dual x16 configuration; one VGA in PCIe1 & the other in PCIe4. I Used the SLI bridge that was provided with the motherboard, all drivers for the motherboard and the cards are up to date.
I have tried running both cards separately and both were performing well under benchmarking (with almost identical results)
I am satisfied with the performance of my computer right now, But I wouldn't mind juicing out every drop that I can get. So if someone out there can help me figure this issue, I would be thankful.
Have a good day
Facebook
Twitter
Instagram