390x devil hibryd and corsair 240
- Thread starter joasjoas
- Start date
The length is fine, if a little bit cosy- 285mm/290mm
I am not sure about the height of the card, very hard to find the measurements for height support (that 390x is 140mm)
If you have not got a cpu liquid cooler you should be fine- you can mount the 120mm rad at the top of the case so you can keep the gpu clearance
I am not sure about the height of the card, very hard to find the measurements for height support (that 390x is 140mm)
If you have not got a cpu liquid cooler you should be fine- you can mount the 120mm rad at the top of the case so you can keep the gpu clearance
the cpu raijintek have a job. my question is mainly by rl , tubes if not buckled and blocked the passage of water , the little room with the side .
which it is the only card should fit smoothly, have a Gainward GTX 970 Phantom . (Sorry use Google translate)
which it is the only card should fit smoothly, have a Gainward GTX 970 Phantom . (Sorry use Google translate)
TRENDING THREADS
-
-
Question Seagate Ironwolf as single harddrive - ERC disabled?
- Started by Mumintroll
- Replies: 5
-
-
Question Looking for a Cybenetics report that Tom's Hardware referenced - EVGA SuperNova 650 P2
- Started by motoxnate
- Replies: 6
-
Question How to correctly identify and oragnize PSU cables with their respective PSUs
- Started by BlackOrangutan
- Replies: 6
-
Question 24 inches monitor FHD or QHD for home office and scaling dilemma
- Started by RyanBR
- Replies: 3
Facebook
Twitter
Instagram