Installed a Corsair h60 the other day on my i7-3770, and cant seem to get the fan to auto adjust, I have the fan plugged into the CPU_Fan header on the motherboard and have found the settings for it in bios, but the only settings are "Automatic Full On" or "setting a target Temp" (currently set at 45c) that also gives you the option to select a level 1-9 selecting one of the levels only sets the fan at a constant speed no matter what the temp of the CPU. Having it at level 7 leaves the fan around 1900 rpm no matter if the CPU is idling at 30c or at full load at 50c. I know for a fact the stock cooler would adjust the fan speed based on CPU Temps before I replaced it. Any input would be helpful.
Thanks,
P.S. I am new to after market cooling so this could be totally normal and I just don't know it.
Thanks,
P.S. I am new to after market cooling so this could be totally normal and I just don't know it.
Facebook
Twitter
Instagram