Hi guys,
I am considering this memory for a build G.Skill Trident X Series 16GB (2 x 8GB) DDR3-2400 Memory:
http://www.gskill.com/en/product/f3-2400c10d-16gtx
If i put this on a SABERTOOTH Z97 MARK 1 with an i7 4790k is it ok?
On pcpartpicker.com I get this compatibility issue for my configuration:
The G.Skill Trident X Series 16GB (2 x 8GB) DDR3-2400 Memory operating voltage of 1.65V exceeds the Intel Haswell Refresh CPU recommended maximum of 1.5V+5% (1.575V). This memory module may run at a reduced clock rate to meet the 1.5V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum.
I checked the QVL list on http://www.gskill.com/en/product/f3-2400c10d-16gtx and the MOBO is listed. Also I have read that the i7 4790k can work with ram up to 3000Mhz on OC mode.
Taking in consideration all this info, what must be changed? How can I make it better? Is there anything I missed?
I am considering this memory for a build G.Skill Trident X Series 16GB (2 x 8GB) DDR3-2400 Memory:
http://www.gskill.com/en/product/f3-2400c10d-16gtx
If i put this on a SABERTOOTH Z97 MARK 1 with an i7 4790k is it ok?
On pcpartpicker.com I get this compatibility issue for my configuration:
The G.Skill Trident X Series 16GB (2 x 8GB) DDR3-2400 Memory operating voltage of 1.65V exceeds the Intel Haswell Refresh CPU recommended maximum of 1.5V+5% (1.575V). This memory module may run at a reduced clock rate to meet the 1.5V voltage recommendation, or may require running at a voltage greater than the Intel recommended maximum.
I checked the QVL list on http://www.gskill.com/en/product/f3-2400c10d-16gtx and the MOBO is listed. Also I have read that the i7 4790k can work with ram up to 3000Mhz on OC mode.
Taking in consideration all this info, what must be changed? How can I make it better? Is there anything I missed?