Hey All. I resently tried to do a stress test on my pc using Prime95. after i clicked ok in the first or maybe second menu my pc black screened seconds later. Now it keep trying to reboot. It powers on all fans start spinning e.t.c, it gets to the win 10 loading screen then crashes again. sometimes i can get to the bio and can stay on there for a bit longer but will eventually crash again. Iv done the "paper clip" test on my power supply and the fan spins.
My Specs Are.
Motherboard: Asrock H87M
CPU: Intel i7-4790K
Ram: Kingston HyperX Blu 16GB (2x8GB) at 1600MHz ddr3
Graphics: 2x sapphire vapor-x r9 270x OC edition (Factory Over Clock) Crossfire Configuration
PowerSupply: Antec edg650
cpu cooler: Corsair Hydro Series H60 SE CPU Cooler AIO liquid cooling
Cooling: 4 fans
HDD: Westen Digital Blue 1TB
SSD: san disk 250GB
when the pc black screened the first time i think i smelt like a burning smell.
Hope someone can help me, just hope its something cheap.
My Specs Are.
Motherboard: Asrock H87M
CPU: Intel i7-4790K
Ram: Kingston HyperX Blu 16GB (2x8GB) at 1600MHz ddr3
Graphics: 2x sapphire vapor-x r9 270x OC edition (Factory Over Clock) Crossfire Configuration
PowerSupply: Antec edg650
cpu cooler: Corsair Hydro Series H60 SE CPU Cooler AIO liquid cooling
Cooling: 4 fans
HDD: Westen Digital Blue 1TB
SSD: san disk 250GB
when the pc black screened the first time i think i smelt like a burning smell.
Hope someone can help me, just hope its something cheap.