3 long beep codes, no post, no signal. UPDATE No longer getting beep codes

Marvises43230 · Feb 15, 2016

hey there everyone,

I already did the No signal checklist. still having the same issue.

I'm getting 3 long beeps.

I swapped the RAM modules.
(HyperX fury black series 16gb "2 sticks" 1600, Crucial Ballistix 16gb "2 sticks" 1600.)

I even RMA the processor thinking that was the issue.

I don't know what to do :/

Motherboard: MSI 990FXA Gaming , Asrock 990fx killer fatal1ty

CPU: AMD 8350 black series

(I even swapped graphics cards & motherboards)

Specs:
MSI 990fxa Gaming
FX8350
Corsair ax860i power supply
Corsair H100iGTX liquid cooling
HyperX fury black series 1600 16GB
XFX Radeon R9 390 8gb gddr5

***UPDATE***

No longer getting BEEP CODES!!!! (Reseated ram)
Still no post with no signal though.

Paul NZ · Feb 15, 2016

And whats the mobo and cpu?

Marvises43230 · Feb 15, 2016

Paul NZ :

I have 2 motherboards.

MSI 990fxa gaming
Asrock 990 fx killer fatal1ty

CPU: AMD 8350

Paul NZ · Feb 15, 2016

Have you tried 1 stick at a time? Are the sticks in the right slots?

Marvises43230 · Feb 15, 2016

Paul NZ :

I have the sticks in Dimm 1 and 3. Yes i have tried 1 stick at a time.

ko888 · Feb 15, 2016

What boot device do you have connected?

Marvises43230 · Feb 15, 2016

ko888 :

i have a samsung 850 evo 500 gb ssd (no operating system on it yet since this is a new build)

skippyboy92362 · Feb 15, 2016

I hate to tell you this but you may have a bent pin somewhere on your AMD FX 8350 or it is completely failed. Pull the CPU out get a magnifying glass and look at them pins closely. I had a friend that had the same problem and luckily it was just one outside pin he was able to bend back. Yup he couldn't figure it out either. Two new boards, three new sets of ram, and then I brought over a spare AM3 Phenom II I had laying around. Than it posted. That's how we knew it was the CPU. I'll tell you it is not the RAM.

ko888 · Feb 15, 2016

Three beeps only happens during the UEFI BIOS' Driver Execution Environment (DXE) phase. It indicates:

DXEIPL was not found

or

DXE Core Firmware Volume was not found

Like @skippyboy92362 said, I would also suspect a problem with the CPU.

Marvises43230 · Feb 15, 2016

ko888 :

I reseated the Ram and no longer getting Beep codes. but i'm still getting no post or no signal to monitors

skippyboy92362 · Feb 16, 2016

Try it one more time with out the drives hooked up and memory out if you get beeps put ram back in hopefully you get beeps again. If no go shut your power off pull power cord out of wall socket (hope you done this reseating ram) reset your bios with the jumpers. Try again if no go pull your cpu, ram ,and graphics card. put them back in. Do not hook up the drives try again. Also before you try again what brand and model number of power supply do you have? Send me a link on it. Are these new motherboards or used? Keep us informed please.

Marvises43230 · Feb 16, 2016

skippyboy92362 :

Skippy,

All the parts i've purchased are brand new from New egg.

this is the powersupply I have.

http://www.newegg.com/Product/Product.aspx?Item=N82E16817139044&cm_re=corsair_ax860-_-17-139-044-_-Product

skippyboy92362 · Feb 16, 2016

I doubt now it is your power supply. Ok here is how where going to do this. I'm sending a link to guide you through this.
tp://www.bing.com/videos/search?q=no+video+out+no+beep+codes+no+post&qpvt=no+video+out+no+beep+codes+no+post&view=detail&mid=FB1F9B61454FD655FA74FB1F9B61454FD655FA74&FORM=VRDGAR

Marvises43230 · Feb 16, 2016

skippyboy92362 :

I've already attempted that. If i remove my GPU, i get the GPU beeps. If i remove the ram, i get the ram beeps.

Marvises43230 · Feb 16, 2016

ko888 :

I have already RMA the CPU thinking that was it. There are 0 bent pins.

skippyboy92362 · Feb 16, 2016

Good at least now we know it is not the motherboards or power supply. Get back in touch with us when you receive the new CPU.

Marvises43230 · Feb 16, 2016

skippyboy92362 :

it came in yesterday lol i posted this after i installed it.

4745454b · Feb 16, 2016

Can you post pics of your setup? What two motherboards have you tried?

I'm betting it's something simple. You have a modular PSU, so maybe you have a connection loose, or you are plugging a cable in wrong. Read the manual and double check everything.

You ignored this from your other thread. Rather then open new ones, follow the advice you get.

Marvises43230 · Feb 17, 2016

4745454b :

no, i didn't ignore this. people stopped posting on it so i opened up a newer thread. I can post pictures of the set up later this evening when i get home from work. The 2 motherboards i have are Asrock 990fx killer fatal1ty and the msi 990fxa gaming

4745454b · Feb 17, 2016

People didn't stop posting. The dates are all feb 15 and 16. That's now. I could see making a new one if the dates here are all Feb 2 and 3, and then a bunch of time goes by. But just because people aren't replying NOW doesn't mean they aren't replying at all. We don't live here and humans do something called sleep. Which means for a few hours every day you won't see anyone reply. It's ok, relax. Breathe. We'll get you through this.

Marvises43230 · Feb 17, 2016

4745454b :

yes, i am aware. i am relaxed just super frustrated that i have done just about every trouble shooting there is and people just keep commenting with the steps i've already taken. i have been having this issue since mid January. I do apologize for opening a 2nd thread about it. just trying to get this squared away. My last resort is taking it to a local shop and paying $50-75 for them to tell me "oh, this is what's wrong"

3 long beep codes, no post, no signal. *UPDATE* No longer getting beep codes

Reputable

Polypheme

Reputable

Polypheme

Reputable

Titan

Reputable

Distinguished

Titan

Reputable

Distinguished

Reputable

Distinguished

Reputable

Reputable

Distinguished

Reputable

Titan

Reputable

Titan

Reputable

Share this page

3 long beep codes, no post, no signal. UPDATE No longer getting beep codes