Here is me stuck when connecting headers from case to the motherboard, Going by the ASRock Extreme4 x99 manual, first listed onboad header and connectors was what is called "System Panel Header" the case I am using Thermaltake supp F51 had already Pins coming from the front side, with power sw, power led +/- hdd led reset sw, so one by one i connected those to those connections on ASRock motherboard, (pls see 3rd picture attached)
Then 2nd page stated another header connections called "Power Led Header" on motherboard manual, again with PLED + + - connections, however all PLED- and + I already connected to the other System Panel Header pins, since they had those connections there,
now I am confused, what is the difference between these 2 headers and which ones I should use to make it correctly?
Please see photos I also took photos of the ASRock manual each page that lists these;
Motherboard Manual, First one stated was "System Panel Header":
Right after this second page there is another called Power LED Header that also includes same pins;
This is how it looks like on the board, itself I had one set of single pin connections labeled from the front panel of the Thermaltake case so I connected those to the header listed first, but you can see at the top there is 3-pin 'Power Led header' connections as well that was listed right after that one.:
Then 2nd page stated another header connections called "Power Led Header" on motherboard manual, again with PLED + + - connections, however all PLED- and + I already connected to the other System Panel Header pins, since they had those connections there,
now I am confused, what is the difference between these 2 headers and which ones I should use to make it correctly?
Please see photos I also took photos of the ASRock manual each page that lists these;
Motherboard Manual, First one stated was "System Panel Header":
Right after this second page there is another called Power LED Header that also includes same pins;
This is how it looks like on the board, itself I had one set of single pin connections labeled from the front panel of the Thermaltake case so I connected those to the header listed first, but you can see at the top there is 3-pin 'Power Led header' connections as well that was listed right after that one.: