hey guys im new to overclocking and need some help

magnus8990

Reputable
Feb 13, 2016
13
0
4,510
ok im new to this ''overclocking'' thing and have heard its good so i tryed som sittings and can i get more out of what i have now ? my graphic card asus 4gb gtx970 strix overclocked edition


have the standard cooler instaled in it

so what can i pull up/or down
thx for the help :)
 
Solution
Download Msi afterburner and Furmark. open msi afterburner and it will show you all the clockspeeds and temps of your gpu. increase the core clock by 10-25mhz intervals and run furmark for a min or 2 inbetween increases to verify stability. Once the temps go over ~80c, or you get artifacts or crashes, lower the core clock back to the last successful setting and start the same thing with the memory clock speed. You should increase the power limit as far as it goes, but leave the voltage alone/very small increases, assuming the temps are ok. Once you have your final overclock, run furmark for an hour straight to make sure there are no problems.
Download Msi afterburner and Furmark. open msi afterburner and it will show you all the clockspeeds and temps of your gpu. increase the core clock by 10-25mhz intervals and run furmark for a min or 2 inbetween increases to verify stability. Once the temps go over ~80c, or you get artifacts or crashes, lower the core clock back to the last successful setting and start the same thing with the memory clock speed. You should increase the power limit as far as it goes, but leave the voltage alone/very small increases, assuming the temps are ok. Once you have your final overclock, run furmark for an hour straight to make sure there are no problems.
 
Solution