Asus P8Z68-V PRO/GEN3 Post Issues

Toggle sidebar Toggle sidebar
D

DrSmeve

Reputable
Dec 4, 2015
8
0
4,510
When I boot my pc, it goes through a couple cycles, powering up then powering down, without the display ever coming on. Then it hangs with the fans and everything powered. I can get it to POST if I clear cmos. It comes up with the warning about needing to restore settings, but If I go into the BIOS and save/restart, it goes through the same process. I can manage to get it into Windows if I boot from within bios and don't save the settings. Everything works just fine once I get past the odd post behavior.

Any clues what might be causing this?
 
Sort by date Sort by votes
smorizio

smorizio

Titan
Jan 22, 2010
30,984
9
125,315
make sure the mb has the newest bios file. in the bios make sure the mb set to standard mode. if it set to performance mode the ram to cpu time is off. ALSO under ai tab make sure xmp profile is on and the mb reading the ram speed right. use cpu-z to check the ram speed and if the mb reading the ram right.
 
Upvote 0 Downvote
D

DrSmeve

Reputable
Dec 4, 2015
8
0
4,510


I'm on the newest bios version. CPU-Z shows my RAM running at stock speed.



Whoops, thought I put my specs in the op.

Corsair 750TX
EVGA GTX 750 Ti
i7-2600k
G.Skill Sniper 16GB 1866


Also, if I power the pc off, it immediately tries to boot back up but does the cycling thing.
 
Upvote 0 Downvote
D

DrSmeve

Reputable
Dec 4, 2015
8
0
4,510
So I figured out the booting issue. I must have switched the TPU switch on the board while adjusting cables.

Thanks for the replies!

Now I just have to figure out how to get the overclocking features on my board!
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom