Hello people,
I'm new here in forum, so this is my first question I'm hoping it is fine and proper.
I want to add 4 more gigabytes of ram to my older 2x2gigabyte ones. In total I want to make it 8 gigabytes.
My current ram couple is KHX1600C9D3K2/4G.
http://www.kingston.com/datasheets/KHX1600C9D3K2_4G.pdf
And the board is ga-ex58-ud3r.
http://www.gigabyte.com/products/product-page.aspx?pid=3265#ov
Problem is that i want to make sure new module or modules will work properly with 6 years old ram couple. So which ram should i choose, or which parameters needs to be checked.
is this one ok?
http://www.kingston.com/datasheets/HX316C10F_4.pdf
Other part of question is that if I buy 4 gb one module, which slots (board have 4) i should use them with?
I'm new here in forum, so this is my first question I'm hoping it is fine and proper.
I want to add 4 more gigabytes of ram to my older 2x2gigabyte ones. In total I want to make it 8 gigabytes.
My current ram couple is KHX1600C9D3K2/4G.
http://www.kingston.com/datasheets/KHX1600C9D3K2_4G.pdf
And the board is ga-ex58-ud3r.
http://www.gigabyte.com/products/product-page.aspx?pid=3265#ov
Problem is that i want to make sure new module or modules will work properly with 6 years old ram couple. So which ram should i choose, or which parameters needs to be checked.
is this one ok?
http://www.kingston.com/datasheets/HX316C10F_4.pdf
Other part of question is that if I buy 4 gb one module, which slots (board have 4) i should use them with?