can i use hyperX Fury 4GB DDR3 1600mhz to mother board P7H55-M LE??

[renzoken84]

Hi,

im using P7H55-M LE mo'bo , i7 870 8mb cache processor, 580w psu, just wanted to ask can i use
kington hyperX Fury 4GB DDR3 1600mhz. PLEASE HELP thanks. (POOR ENGLISH)

 

[siviprime]

Yes, your motherboard will support that RAM; it will automatically downclock it from 1600MHz to 1333MHz (the maximum speed supported).

 

[renzoken84]

wow very fast responds. anyway thx so much for useful info for me siviprime.

and ty toms

 

[Tradesman1]

Yes, your motherboard will support that RAM; it will automatically downclock it from 1600MHz to 1333MHz (the maximum speed supported).

_______________

Might want to check that - the Fury run off PnP which is NOT SUPPORTED by the H55 chipset. PnP support didn't come into play till the 1155 mobos, P67/H67 chipset. They are additionally made with high density memory chips and few H55 mobos can accept those either.

 

[renzoken84]

so it mean i can use it or not?

 

[renzoken84]

Yes, your motherboard will support that RAM; it will automatically downclock it from 1600MHz to 1333MHz (the maximum speed supported).

_______________

Might want to check that - the Fury run off PnP which is NOT SUPPORTED by the H55 chipset. PnP support didn't come into play till the 1155 mobos, P67/H67 chipset. They are additionally made with high density memory chips and few H55 mobos can accept those either.

so the answer is can or cannot use the RAM? sorry bad english

 

[siviprime]

Alright then. Tradesman1 was correct, H55 chipset motherboard can't handle 4Gb DIMM chips, as it only supports 2GBit chip densities.
I thought it would be supported because I used Kingston HyperX Savage in my old PC (with a Sabertooth X58). Being the same generation chipset, I thought it would be compatible. Good shout!

 

[renzoken84]

Alright then. Tradesman1 was correct, H55 chipset motherboard can't handle 4Gb DIMM chips, as it only supports 2GBit chip densities.
I thought it would be supported because I used Kingston HyperX Savage in my old PC (with a Sabertooth X58). Being the same generation chipset, I thought it would be compatible. Good shout!

BRO IM USING 4GB DDR3 RAM IT STILL WORK FINE WITH MY MOBO

JUST DUNNO WHAT TYPE OF RAM IM USING.. IT COLOUR GREEN THAT WHAT I SAW

 

[Tradesman1]

It's probably an older line, maybe of value DRAM, the NT series of GSkill value DRAM uses the low density chips that are generally needed for H55 mobos. Should (hopefully, be able to get the model number using the free app CPU-Z, look in the SPD tab at "Part number"