-
T-Mobile Home Internet: Revisiting 5G connectivity for the home after two years
-
Multi-million dollar Cheyenne supercomputer auction ends with $480,085 bid — buyer walked away with 8,064 Intel Xeon Broadwell CPUs, 313TB DDR4-2400 ECC RAM, and some water leaks
MSI gtx 970 4g gaming oc guide
- Thread starter MrStark
- Start date
Solution
Dylan Smit
Honorable
- May 13, 2015
- 428
- 1
- 10,965
Download msi afterburner,
Increase the max power with 10%
Play around with the overclocks untill its stable with it, also look at temps and dont let your gpu over 80°C. If it is put your max power 5% above normal and do the same. You can google good stable settings.
Increase the max power with 10%
Play around with the overclocks untill its stable with it, also look at temps and dont let your gpu over 80°C. If it is put your max power 5% above normal and do the same. You can google good stable settings.
Dylan Smit
Honorable
- May 13, 2015
- 428
- 1
- 10,965
I never ajust voltages without a watercooled card because the heat rises more but you can defenetely get higher clocks
Mr Kagouris
Judicious
- Sep 7, 2015
- 3,966
- 2
- 32,565
Download MSI Afterburner and install it.
Download Unigine Valley benchmark and install it.
Go into afterburner, increase max power by 10%, increase core clock by 20MHz.
Run Valley Benchmark.
Repeat until Valley Benchmark crashes.
At this point, you should decide whether you want to play with the voltage or not to get even better clocks.
If not, just fine-tune the core clock until you reach the highest one that Valley Benchmark will complete with, then run the benchmark for about an hour. If it doesn't crash, repeat this process with the memory clock.
If you want to play with the voltage, raise the voltage by 10mV and continue overclocking the core clock until Valley Benchmark crashes again, and raise the voltage again. I wouldn't go over 50mV increase for safety. After you've reached the highest clock that the benchmark completes with, run the benchmark for a couple of hours with that clock to see if it's entirely stable. If at any point your overclock becomes unstable even though you raised the voltage, raise the max power.
Keep in mind higher voltage means more heat, so if your temps get out of hand you may need to make a custom fan profile.
Download Unigine Valley benchmark and install it.
Go into afterburner, increase max power by 10%, increase core clock by 20MHz.
Run Valley Benchmark.
Repeat until Valley Benchmark crashes.
At this point, you should decide whether you want to play with the voltage or not to get even better clocks.
If not, just fine-tune the core clock until you reach the highest one that Valley Benchmark will complete with, then run the benchmark for about an hour. If it doesn't crash, repeat this process with the memory clock.
If you want to play with the voltage, raise the voltage by 10mV and continue overclocking the core clock until Valley Benchmark crashes again, and raise the voltage again. I wouldn't go over 50mV increase for safety. After you've reached the highest clock that the benchmark completes with, run the benchmark for a couple of hours with that clock to see if it's entirely stable. If at any point your overclock becomes unstable even though you raised the voltage, raise the max power.
Keep in mind higher voltage means more heat, so if your temps get out of hand you may need to make a custom fan profile.
TRENDING THREADS
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session- Started by Admin
- Replies: 51
-
Question Sapphire RX 5700 XT Nitro+ is not working in main PCIe slot ?
- Started by digows
- Replies: 24
-
-
-
Question what should i look out for when buying used ryzen chips?- Started by jordanbuilds1
- Replies: 23
-
Question Upgrading GPU, do I need to worry about PCIe and lanes?
- Started by bcemail
- Replies: 5
Facebook
Twitter
Instagram