- Mar 10, 2016
- 2
- 0
- 1,510
I have tried to upgrade the RAM in this dell 560 from 4GB (4x1gb) to 8GB (4x2GB) This unit is stock as it came. My problem is that after installing the new RAM all I get is 2 beeps, will not boot up.
I understand that the 2 beeps indicates that the system does not detect the RAM. I have tried numerous posts tying to fix this problem. Even went back to the 4GB (4x1gb) which was working just fine before I started messing with it, all I get is 2 beeps and no boot up. I have checked all the cable connections, proper seating of the ram, tried installing 1 mod of ram at a time, tried clearing the CMOS setting, tried removing the battery on the motherboard all to no avail. Any help
I understand that the 2 beeps indicates that the system does not detect the RAM. I have tried numerous posts tying to fix this problem. Even went back to the 4GB (4x1gb) which was working just fine before I started messing with it, all I get is 2 beeps and no boot up. I have checked all the cable connections, proper seating of the ram, tried installing 1 mod of ram at a time, tried clearing the CMOS setting, tried removing the battery on the motherboard all to no avail. Any help
Facebook
Twitter
Instagram