- Mar 15, 2016
- 4
- 0
- 1,510
Hi,
I'm relatively inexperienced with this stuff, and unfortunately I don't have the model number for my motherboard. I'm looking to get a new GPU (GTX 750Ti low-profile), but I expect I need to upgrade my PSU, and I'm not sure whether my motherboard will support the PSU I need.
I bought my computer pre-built; and it was called the Lenovo ThinkCenter M82.
Current Setup
CPU: i7-3770 3.4 GHz
GPU: GTX 630 2GB (Zotac) DDR3
PSU: 280W (FSP Group Inc; model #FSP280-40PA)
RAM: 12GB
Intended Setup:
CPU: unchanged
GPU: GTX 750Ti Low-profile (Zotac) DDR5
PSU: 400W (Cougar SL400; item #N82E16817553017)
RAM: unchanged
I was hoping to post a picture of the inside of my case; but I can't find how to do so. my current PSU is connected to the board with a 4 pin connector, and I don't have more than 4 slots on the board for a PSU to connect to.
As for size, I can't get a GPU much bigger than the one I have, because of the limited size of the case. The PSU in question is nearly the same size as my current, so it should fit fine in the case. Any help would be greatly appreciated!
I'm relatively inexperienced with this stuff, and unfortunately I don't have the model number for my motherboard. I'm looking to get a new GPU (GTX 750Ti low-profile), but I expect I need to upgrade my PSU, and I'm not sure whether my motherboard will support the PSU I need.
I bought my computer pre-built; and it was called the Lenovo ThinkCenter M82.
Current Setup
CPU: i7-3770 3.4 GHz
GPU: GTX 630 2GB (Zotac) DDR3
PSU: 280W (FSP Group Inc; model #FSP280-40PA)
RAM: 12GB
Intended Setup:
CPU: unchanged
GPU: GTX 750Ti Low-profile (Zotac) DDR5
PSU: 400W (Cougar SL400; item #N82E16817553017)
RAM: unchanged
I was hoping to post a picture of the inside of my case; but I can't find how to do so. my current PSU is connected to the board with a 4 pin connector, and I don't have more than 4 slots on the board for a PSU to connect to.
As for size, I can't get a GPU much bigger than the one I have, because of the limited size of the case. The PSU in question is nearly the same size as my current, so it should fit fine in the case. Any help would be greatly appreciated!
Facebook
Twitter
Instagram