Windows restartin after adding new RAM stick

i1yas · Mar 17, 2016

He guys i have purchased a new RAM stick today 8gb Single stick and already installed two 4+4 Sticks and dule boot windows 10 with linux.
on linux all ram sticks are working perfectly 4+4+8
on windows 10 safe mode system runs 30 min after that i shut it down.
on normal mode windows 10 hang and restart after within 5 min i think time difference is same.
Help me to figure out problem

geofelt · Mar 17, 2016

Ram is sold in kits for a reason.
A motherboard must manage all the ram using the same specs of voltage, cas and speed.
Ram from the same vendor and part number can be made up of differing manufacturing components over time.
Some motherboards can be very sensitive to this.
That is why ram vendors will NOT support ram that is not bought in one kit.

Look in the bios and try upping the ram voltage a notch.
Test your ram with memtest86+
You should be able to do a full pas with NO errors.

Kiril_Petkov · Mar 17, 2016

Hi there is probably issue whit RAM sticks timings or clock speed or both. Could you please post all the sticks specs. Linux manage the RAM different then Windows. It is not a good practices to mix 3 sticks of RAM because I suppose the 4+4 are dual channel and whit 1 single 8 that good be a big issue for some MB. Also could you please tell us the MB model and in which RAM slot are each stick.
For start you could check in BIOS if all the stick are running on same clock speed and same timings if they are windows should run w/o issue. There is one more think whit Win10 during the installation it remembers you HW specs and if you try to change the HW that could cause issue (should only apply for MB, but this is Windows still there could be some bugs).

i1yas · Mar 17, 2016

geofelt :

i did memtest there was no error

i1yas · Mar 17, 2016

both rams are from same vendor and same clock speed and voltage actually working on linux perfectly

Tradesman1 · Mar 17, 2016

What mobo, CPU and model #s of the DRAM

i1yas · Mar 17, 2016

Mobo is Asus p8h77vle
Processor Core i5 2500
Ram KVR 1333mhz

Tradesman1 · Mar 17, 2016

Try raising DRAM voltage and VCCSA (might be VCCIO) voltage each up 0.05

Search

Windows restartin after adding new RAM stick

i1yas

Distinguished

Tradesman1

geofelt

Titan

Kiril_Petkov

Commendable

i1yas

Distinguished

i1yas

Distinguished

Tradesman1

Legenda in Aeternum

i1yas

Distinguished

Tradesman1

Legenda in Aeternum

TRENDING THREADS

Latest posts

Moderators online

Share this page