Newly built computer turns on, but displays "no signal"

Zanarisrobo · Mar 18, 2016

My newly built computer turns on, but when connected to a monitor it displays "no signal". I have tried clearing cmos, using different both vga and dvi cables and using one ram stick

gilbadon · Mar 18, 2016

http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems

AreH · Mar 18, 2016

Could be wrong monitor input. Check it.

Best luck!

boosted1g · Mar 18, 2016

This thread covers 95% of all causes of no display/no boot issues.

http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems

If you tried all this and still no luck then we will need a full list of what parts are in your PC.

Zanarisrobo · Mar 18, 2016

gilbadon :

I have gone through this list

Zanarisrobo · Mar 18, 2016

My specs

AMD A10-6800K
Asus F2A85-M LE
Ballistix 4gbx2

djreedj · Mar 18, 2016

try to plug in ONLY the processor, power, and memory and see if you can get to bios

freezingpickles · Mar 22, 2016

Could be a problem with your monitor, such as an incompatibility issue. Some monitors can only turn on with an HDMI cable. Is there any noise when the computer boots up?

Search

Newly built computer turns on, but displays "no signal"

Zanarisrobo

Honorable

djreedj

gilbadon

Distinguished

AreH

Distinguished

boosted1g

Titan

Zanarisrobo

Honorable

Zanarisrobo

Honorable

djreedj

Honorable

freezingpickles

Reputable

TRENDING THREADS

Latest posts

Moderators online

Share this page