Computer won't boot after changing memory clock speed through BIOS

xeviouz11 · Mar 19, 2016

Hi everyone.
i tried to change my ram's clock speed through bios, now my pc wont boot. i just hear the fans spinning when i turn it on. i tried removing the ram and placing it back in, i tried removing the psu cables, and i tried resetting cmos by removing the cmos battery for around 10 seconds and then placing it back in. None of them worked. Thanks for the help in advance

specs:
MSI 880GMS-E41 (FX)
Powercolor devil r9 270x
Corsair vengeance 4gb
amd fx 6300 (using stock cooler)
corsair vs650 psu

ahnilated · Mar 19, 2016

reset the bios.

xeviouz11 · Mar 19, 2016

Vic 40 · Mar 19, 2016

In the manual for your motherboard,can be looked at via the makers site,will a jumper be pointed out or take the motherboard battery of for a few minutes (so abit longer than what you did) and place it back.To make sure you can set optimal default values again after doing this.

xeviouz11 · Mar 19, 2016

i cant go back to the bios settings since there's no display when i turn on my PC, i only hear fans running.

Vic 40 · Mar 19, 2016

Since you post here it seems you can get onto the internet. Anyway,taking the motherboard battery off should do the trick as well,just do it for 15min. or so and take it from there.

ko888 · Mar 19, 2016

xeviouz11 · Mar 19, 2016

it worked. thanks, you are a life saver

Search

Computer won't boot after changing memory clock speed through BIOS

xeviouz11

Distinguished

ko888

ahnilated

Splendid

xeviouz11

Distinguished

Vic 40

Titan

xeviouz11

Distinguished

Vic 40

Titan

ko888

Titan

xeviouz11

Distinguished

TRENDING THREADS

Latest posts

Moderators online

Share this page