Hp xw6600 won't turn on after installing new NOX URANO vx650 w

mourad001

Reputable
Feb 25, 2015
18
0
4,510
Hi all,

I would like that you help me because after installing a new PSU brand NOX URANO Vx650w on a HP XW6600 (2 xeon, 8gb, 2 hdd, 1 dvdr w), my pc dont run and i see the green led of the MOBO stay on and when i push run nothing.

Could u help please.
 
Solution


FAR better than the one you have. If you can find a unit from Seasonic, XFX, or Superflower, even better but if not that will do the job.

Rogue Leader

It's a trap!
Moderator
Double check all your connections including your CPU connection.

Also NOX is actually a poor quality PSU and are generally far overrated. They are made in China by a company called CWT which generally makes low end PSUs. With dual Xeons it may well not be enough juice. Even if you get it running you may have problems. You should consider returning it and looking for a better quality PSU.

 

Ralston18

Titan
Moderator
What input voltage are you using?

Have you tried another power cord?

Double check all interior connections for correctness and tightness.

What is the load on the PSU? Add up all powered components including GPU, extra fans, etc. Total should be less than the PSU's rated output of 650w.