about powersupply question

Guchio

Reputable
Dec 1, 2015
25
0
4,530
i have motheboard with 8 pin 12V slot but i have power supply with 4pin 12V plug will it work?
or i can just order normal one ;)
 
Solution


Yes I am saying it will work, but it is REALLY bad quality and a risk to use. If you need to get it working now then sure, but I would replace it with one of my suggestions immediately.

Rogue Leader

It's a trap!
Moderator


I think you have it backwards as his PSU only has a 4 pin but the board has an 8 pin connector.

To the OP, you need to have a full 8 pin CPU connector (Many times the 2 4 pins split as mentioned above and become an 8 pin. What PSU and motherboard are you using? If your PSU doesn't have an 8 pin, you should buy a new PSU.
 

Christian5192

Reputable
Aug 21, 2015
111
0
4,710


Ops. Youre right. Thanks for correcting me good sir.
 

Guchio

Reputable
Dec 1, 2015
25
0
4,530

board here
PSU here
 

Guchio

Reputable
Dec 1, 2015
25
0
4,530


So you say i can run my pc with this PSU ,but better get new one?
Thank you for anwser.
 

Guchio

Reputable
Dec 1, 2015
25
0
4,530

you sure that i can run pc with this psu i,m just scared to fck it up :D , but i want try new pc before new PSU arrives :)

 


No, I'm saying it can run with only a 4-pin if you are not overclocking and you have a good power supply. But you don't have a good power supply. Your CiT PSU is terrible and a fire hazard.
 

Rogue Leader

It's a trap!
Moderator


Yes I am saying it will work, but it is REALLY bad quality and a risk to use. If you need to get it working now then sure, but I would replace it with one of my suggestions immediately.
 
Solution