New build problem booting

Toggle sidebar Toggle sidebar
L

lbibby123

Reputable
Jan 13, 2016
5
0
4,510
I have just finished my first build and wired everything up "correctly" to the best of my knowledge. After I powered it up, the fans and LED turned on but there is no output to my monitor. Is there a step I am missing? Or is there likely to be an amatuer mistake I've made? Thanks in advance

Case - Corsair 250D mini ITX tower
OS - Window 10
Motherboard - MSI H81I
PSU - Corsair CX600
CPU - Intel core i5 4460
GPU - EVGA GeForce GTX750Ti
HDD - Seagat Barracuda 2 TB
RAM - Corsair Vengeance 2x4GB
 
Solution
smorizio
new pc mb most of them dont have speakers on them. use led or debug led to tell you where the pc is posting or not.
new pc plug the video into the mb and gpu ports see if the mb has defaulted to the onboard video. if not pull the gpu an one ram stick see if onboard video posts. if the onboard video posts check the bios rev if it older then whats on msi web page download it to a usb stick and use the mb bios updater to update it.if there no post. make sure the mb sitting on standoffs. 4 pin power plug on the edge of the mb is connected. if there no post check that the fans are on the right pins and the case header/reset button not broken or on the wrong pin. check that the oi shield not shorting out the mb. the cx power supply not a...
Sort by date Sort by votes
smorizio

smorizio

Titan
Jan 22, 2010
30,984
9
125,315
new pc mb most of them dont have speakers on them. use led or debug led to tell you where the pc is posting or not.
new pc plug the video into the mb and gpu ports see if the mb has defaulted to the onboard video. if not pull the gpu an one ram stick see if onboard video posts. if the onboard video posts check the bios rev if it older then whats on msi web page download it to a usb stick and use the mb bios updater to update it.if there no post. make sure the mb sitting on standoffs. 4 pin power plug on the edge of the mb is connected. if there no post check that the fans are on the right pins and the case header/reset button not broken or on the wrong pin. check that the oi shield not shorting out the mb. the cx power supply not a good unit. try another power supply or try the mb on top of the mb box see if it posts.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom