JPWR ? Help

Toggle sidebar Toggle sidebar
J

jamesqong

Reputable
Jan 24, 2015
9
0
4,520
Hello,
I am having some difficultly figuring out which power connecters from my supply go into my new mb. I am really afraid of plugging the wrong thing in here and damaging something. Can one with some experience in power connectors help me out?

I have a cooler master m600 power supply
http://www.coolermaster.com/service/support/model/RS-600-AMBA-D3/

and MSI x power titanium edition z170 mobo
https://us.msi.com/Motherboard/support/Z170A-XPOWER-GAMING-TITANIUM-EDITION.html#down-manual

My power connector dilema is on page 11 of the mobo manual.
 
Solution
J
It turns out that the 6pin and 4 pin are not required to boot. the 6pin is a normal pci power connector. It would have been helpful if the manual noted that.
Sort by date Sort by votes
J

jamesqong

Reputable
Jan 24, 2015
9
0
4,520


thank you for your reply. I dont think i have those connectors. I have 1 24 pin, so that works, then a 4+4pin and thats it for cpu connectors. Do you think i need an adaptor here or new power supply?
 
Upvote 0 Downvote
Karl_oh

Karl_oh

Reputable
Mar 31, 2014
439
0
4,960


Yeah its a weird setup, normally motherboard only have a 24pin plus supplementary 4pin or 6pin power

Check the graphics card cables, they should have 6 pins etc.

 
Upvote 0 Downvote
J

jamesqong

Reputable
Jan 24, 2015
9
0
4,520
It turns out that the 6pin and 4 pin are not required to boot. the 6pin is a normal pci power connector. It would have been helpful if the manual noted that.
 
Upvote 1 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom