- Nov 16, 2015
- 26
- 0
- 4,530
I have recently purchased a V-Guard Sesto Dx 600 UPS. Unfortunately, in India (Where I live) there is a power cut issue. Ideally UPS is just for backup whenever there is power loss. It should provide me at least of 5-7 minutes of backup to shut down my computer. Guess what, It doesn't happen so. I have been facing this problem since day one. Changed my UPS for about 3 times still the same problem exist. Whenever there is a power cut my computer automatically goes into a loop. I don't have any control over it after that. These are my PC specs:
Now my UPS features are:
My total Wattage for the PC is approx 400W. I don't think my ups is able to support that. Please help.
Nvidia GTX 970
AMD FX 8320
PSU 550W Corsair
CM Air Cooler 103
ASUS M5A97 R2.0
ADATA 128GB SSD
Seagate 1TB HDD
Dell Monitor S2216H
Now my UPS features are:
Model: SESTO DX
Output Voltage: 230V AC±10%, 50 Hz±1%
Output Waveform: Pseudo Sine Wave
Indications: Visual and Audio
Cabinet Dimensions (mm): 279x101x142
Product Warranty: 24 Months
Off-mode battery charging with high voltage protection
Backup time : 10 -15 minutes at battery full charge condition
Capacity: 600VA/300W
Application: One computer with 43 cm TFT monitor & one printer (except laser printer)
Battery Details: 12V, 7Ah - 1 No
Cabinet Details: ABS, Black
Weight (Kg): 4.2
Battery Warranty: 24 Months
In built ZPD technology
My total Wattage for the PC is approx 400W. I don't think my ups is able to support that. Please help.
Facebook
Twitter
Instagram