Triple Monitor Display Issue - ATI AMD Radeon R7 370 Series (MSI) 4GB

komosky

Honorable
Feb 29, 2012
7
0
10,510
So just picked up a new ATI AMD Radeon R7 370 Series (MSI) 4GB graphics card and hooked up my two monitors through the DVI and DVI-D connectors one which is a VGA to DVI adapter, and my TV with the HDMI, now running on the desktop it detects all three monitors, but it's only allowing me to display two at a time, if I want to enable the third display I have to disable one of the already enabled displays.

I had triple monitors setup on my old shitty card and motherboard before getting the new motherboard and graphics card by enabling the GPU on the motherboard and using that for one of the displays while running the TV and another monitor off the card, however, my new motherboard does not have an onboard GPU.

Here is my display setup: http://i.imgur.com/2btrSC8.jpg

My system specs from Speccy:

Operating System
Windows 10 Pro 64-bit
CPU
AMD FX-8350 12 °C
Vishera 32nm Technology
RAM
32.0GB Dual-Channel DDR3 @ 1333MHz (11-10-10-25)
Motherboard
MSI 970 GAMING (MS-7693) (CPU 1) 18 °C
Graphics
ELSFWC401 (1920x1080@60Hz)
V233H (1080x1920@60Hz)
4096MB ATI AMD Radeon R7 370 Series (MSI) 32 °C
Storage
223GB ADATA SP550 (SSD) 15 °C
931GB Seagate ST31000524AS (SATA) 20 °C
931GB Seagate ST31000524AS (SATA) 22 °C
931GB Seagate ST31000524AS (SATA) 21 °C
931GB Seagate BUP Slim BK SCSI Disk Device (USB (SATA)) 24 °C
Optical Drives
HL-DT-ST DVDRAM GH24NSB0
Audio
Realtek High Definition Audio
 

komosky

Honorable
Feb 29, 2012
7
0
10,510
Alright so I managed to get it working, the problem was that in order to run 3 monitors you must use the display port, and the display port must be an active adapter not a passive one, problem solved for anyone who may have this problem in the future enjoy :D
 

dewminator332

Prominent
Mar 12, 2017
9
0
510


i got that and its still not working what do i need to do????
 

dewminator332

Prominent
Mar 12, 2017
9
0
510


Hi i think you answered on of my threads but i have 2 dvi connected monitors and then went and picked upo an active display adaptor and it still wont work, when im launching my computer all 3 work but then in windows only 2 work what do i do??