I bought a Rosewill Gungnir and I had a problem on boot and it displayed a message about system fan failure, but all the fans were working. The fan controller switch when moved to the right most position would turn off my computer. It then would not boot at all when the switch was in any position. I just completely disconnected from the hub and everything works perfectly. This is a hard problem to solve if you don't know what the fan hub looks like. It has a kind of odd design with two molex port things that have an end where something plugs in and another end where you could continue the molex cord by plugging a port into it. Am I just wiring it wrong or is mine busted?