can i mix corsair value ram with kingston hyperx ? will it work ?
- Thread starter MyNameX
- Start date
Solution
Kiril_Petkov
Commendable
- Feb 15, 2016
- 218
- 0
- 1,760
it's from Speccy :
CPU
Intel Core i5 3570K @ 3.40GHz 34 °C
Ivy Bridge 22nm Technology
RAM
4.00GB Single-Channel DDR3 @ 799MHz (11-11-11-30)
Motherboard
Gigabyte Technology Co. Ltd. H77-DS3H (Intel Core i5-3570K CPU @ 3.40GHz) 28 °C
Graphics
BenQ RL2240H (1920x1080@60Hz)
4096MB ATI AMD Radeon R9 380 Series (Sapphire/PCPartner) 49 °C
Kiril_Petkov
Commendable
- Feb 15, 2016
- 218
- 0
- 1,760
It should work just make sure they are not set for dual channel see manual :"Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.
Dual Channel mode cannot be enabled if only one DDR3 memory module is installed.1.
When enabling Dual Channel mode with two or four memory modules, it is recommended that memory 2. of the same capacity, brand, speed, and chips be used and installed in the same colored DDR3 sockets. For optimum performance, when enabling Dual Channel mode with two memory modules, we recommend that you install them in the DDR3_1 and DDR3_2 sockets.
Read the following guidelines before you begin to install the memory:
Make sure that the motherboard supports the memory. It is recommended that memory of the same ••capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
Always turn off the computer and unplug the power cord from the power outlet before installing the ••memory to prevent hardware damage.
Memory modules have a foolproof design. A memory module can be installed in only one direction. ••If you are unable to insert the memory, switch the direction."
That could cause problem you have to test but for single channel they should work.
Dual Channel mode cannot be enabled if only one DDR3 memory module is installed.1.
When enabling Dual Channel mode with two or four memory modules, it is recommended that memory 2. of the same capacity, brand, speed, and chips be used and installed in the same colored DDR3 sockets. For optimum performance, when enabling Dual Channel mode with two memory modules, we recommend that you install them in the DDR3_1 and DDR3_2 sockets.
Read the following guidelines before you begin to install the memory:
Make sure that the motherboard supports the memory. It is recommended that memory of the same ••capacity, brand, speed, and chips be used.
(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)
Always turn off the computer and unplug the power cord from the power outlet before installing the ••memory to prevent hardware damage.
Memory modules have a foolproof design. A memory module can be installed in only one direction. ••If you are unable to insert the memory, switch the direction."
That could cause problem you have to test but for single channel they should work.
TRENDING THREADS
-
-
-
Question Free design app to create a 3D effect on images- Started by P1lgimag3
- Replies: 5
Latest posts
-
-
-
-
-
Discussion What's your most favorite GAMING GENRE ? **General game Discussion thread**- Latest: Metal Messiah.
-
Question Buzz Card XFX Speedster MERC319 AMD Radeon RX 6800 XT CORE
- Latest: wolverine86_mi
Facebook
Twitter
Instagram