RAID 0 on Samsung SSDs

neverknowu

Distinguished
Sep 19, 2012
202
1
18,695
I'm using Blackmagic Davinci Resolve, which is a heavy color grading, editing and FX program. The files I work with are usually 4k or even 6k raw files. I plan to RAID 0 my Samsung SSD 840 pro 512GB drives, as it's important that the drives can read and write as quickly as possible for playback.

I read this article though, and I have this question that I wanted to be sure of. I keep all my program files on one SSD, and I have two more SSDs for video. Would it be better to RAID 0 the drives that have the video on them, and keep the drive that has the actual programs on it as a single drive? Seems like there's a limit to how fast programs can actually run?

Here's the article: http://www.tomshardware.com/reviews/ssd-raid-benchmark,3485-10.html
 
Solution


I wouldn't.
1 for the OS and applications, 2 x with the RAID for your video work.
If you set the two SSD drives up in a raid 0 array.
And depending on your motherboard, and how new it is.

And it has Sata 3.0 enabled ports of your motherboard, depending on the age of it.
You should see roughly double the transfer speed in read and write operations.

Obviously that would mean less waiting around for a 4k video file to load.
The drives would combine with a total of just under 1Tb of storage space.

And be seen in windows as a single listed drive.

You will get better results with a Sata 3.0 enabled port, than a Sata 2.0 enabled port setup in speed.
Check your motherboard has Sata 3.0 specification ports.

Is it worth doing? Yes if you do deal with such large video files at a high resolution.

If I was doing it, I would put the program used for the editing, and the video files on the Raid 0 array.

Or if I had four SSD drives create two arrays of two raid 0 arrays.

One for the editing program, and other software plus the OS. The other for the storage of video files.

I say this because from one SSD drive to two in a raid 0 array would be the slow point at reading and writing if you needed more than a 550Mb a second.
 

neverknowu

Distinguished
Sep 19, 2012
202
1
18,695


It was suggested to me to just take all 3 of my drives and do a RAID 0. I guess I also wanted space, having the one drive with the programs to free up all the space on the two other drives. Does that make sense? These files I work with can be BIG.

I have an Asus x99-e ws with an Intel i7 5960x.
 

USAFRet

Titan
Moderator


I wouldn't.
1 for the OS and applications, 2 x with the RAID for your video work.
 
Solution

neverknowu

Distinguished
Sep 19, 2012
202
1
18,695


Dude, this is really, really helpful. Thank you for listing these parts for me too.