No signal to monitor with new mobo

CrazyBorg

Commendable
Apr 18, 2016
1
0
1,510
[WARNING, I AM A NEWBIE!]

Partslist:
CPU: AMD FX-8350 4.0GHz 8-Core Processor
Motherboard: MSI 970 GAMING ATX AM3+ Motherboard
Memory: PNY An
archy 8GB (2 x 4GB) DDR3-2133 Memory
Storage: Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive
Video Card: Asus GeForce GTX 660 Ti 2GB Video Card
Case: Thermaltake Commander MS/I Snow Edition (White/Black) ATX Mid Tower Case
Power Supply: Thermaltake TR2 600W ATX Power Supply

I recently made my new build, with everything but my mobo being the same. (I derped out and bought the wrong mobo: MSI 970A-g43 which was incompatible with my cpu). Anyways, I had multiple problems and always wondered why it was, and a new mobo was the solution. I went and bought a msi 970 gaming. Now it won't boot. It has all the leds on the mobo light up, all fans spinning, and everything was working before (besides the mobo) so no defective parts. I am using an HDMI monitor by the way..

List of things I have tried and results:

Booted with only 1 ram stick:
tried all combinations, nothing

Reset CMOS RAM:
nothing

Unplug all ram and listen for beeps on the speaker:
It did beep

Unplug the psu and turn it off, hold power button for a minute or two:
nothing

Unplug GPU and make sure everything is in right:
nothing

Tried with different monitors:
nothing

I am open to suggestions, thanks in advance!