sos fan help me pls

tranngoctan198 · Apr 20, 2016

I plan to insert 4 Fan (Cooler Master JetFlo 120 - http://www.newegg.com/Product/Product.aspx?Item=N82E16835103192) in to my case, 2 fan above - 2 fan in front of.
But I hesitate between PWM fan (Cooler Master JetFlo) and Scythe SY1225SL12SH "Slipstream" Case Fan.
Between 2 these is stronger, while its noise I think also about equal.
According to you I should choose type?????
thank you so much

basroil · Apr 20, 2016

If you have PWM output on your motherboard, PWM will be easier to set up (as long as all fans are the same model and you want them all to move at the same speed). Just get three PWM splitters (or a 4-way splitter) and hook the fan control to the motherboard and power to SATA/molex

If you don't have PWM, you'll want voltage control (3 pin) fans. Unless your motherboard has multiple headers or high amp headers, you should consider a dedicated fan controller like the Sentry 3

tranngoctan198 · Apr 20, 2016

basroil :

So, should i choose? For my case! I want full speed all 4 fan!

basroil · Apr 22, 2016

tranngoctan198 :

So you want that thing to sound like a jet engine for no reason? Stupid as hell, but if you like drowning out all sounds with massive fan noise then just get four 3pin voltage control fan and then just get http://www.newegg.com/Product/Product.aspx?Item=N82E16812423166&cm_re=molex_to_fan-_-12-423-166-_-Product. If you realize that it's stupid as all hell to do that, just get the same item from that link and use PWM fans instead.

tranngoctan198 · May 5, 2016

basroil :

If I use http://www.newegg.com/Product/Product.aspx?Item=N82E16835103192. For 4 fan (Cooler Master JetFlo 120 - http://www.newegg.com/Product/Product.aspx?Item=N82E168...) in to my case, 2 fan above - 2 fan in front of.
So 4 fan Run FULL RPM? and my case had noise? According to you, should I insert? to the computer I'm cool for optimal.
There is a need to use these Cooler Master JetFlo 120 - http://www.newegg.com/Product/Product.aspx?Item=N82E168...)?
Thank you so much

basroil · May 5, 2016

Unless you short the PWM pin to the 12V then no, that thing I told you about will not work.

As for "optimal cooling", you're likely highly confused. Unless you have SLI of 390X and a 9590 at 5GH, you would never need 4 fans running at max. Most of the time ~30% is more than enough, and in my case with an overclocked 2600K and 970, fans are usually under 30% (pwm means down to 15% possible)

tranngoctan198 · May 5, 2016

basroil :

I using Black Sleeved Jacket (http://www.newegg.com/Product/Product.aspx?Item=9SIAA1K41A5418&ignorebbr=1) for 4 fan
Cooler Master JetFlo 120. So 4 fan Run FULL RPM? Should I Choose? Can you give me the choice that? about Fan?

tranngoctan198 · May 5, 2016

basroil :

i sli gtx 980 ti evga classfield

basroil · May 5, 2016

Still not enough heat for max fan speed in my books. Just get a PWM splitter and set your fan profiles in software, or get a dedicated fan hub like the sentry 3 that has independent temp

tranngoctan198 · May 5, 2016

basroil :

so it mean I choose using Black Sleeved Jacket (http://www.newegg.com/Product/Product.aspx?Item=9SIAA1K...) for 4 fan

tranngoctan198 · May 5, 2016

basroil :

So, should i choose?
Between Black Sleeved Jacket (http://www.newegg.com/Product/Product.aspx?Item=9SIAA1K41A5418&ignorebbr=1&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-VigLink2-_-na-_-na-_-na&cm_sp=&AID=10446076&PID=3821802&SID=inuchiar78000a1700053) and Coboc LP45TX4-18 Sleeved (http://www.newegg.com/Product/Product.aspx?Item=N82E16812423166&cm_re=molex_to_fan-_-12-423-166-_-Product&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-VigLink2-_-na-_-na-_-na&cm_sp=&AID=10446076&PID=3821802&SID=inuchdlo62000a1700053)
So, should i choose? For my case! I want full speed all 4 fan!

basroil · May 5, 2016

Just get whatever you want, not like it will matter anyway.

tranngoctan198 · May 6, 2016

basroil :

Sorry, I really do not understand what you say? can you tell me the details!
Please help me so that I can add to 4 fan in my case! thank you so much

basroil · May 7, 2016

tranngoctan198 :

If you want to (stupidly) keep fans at max, just get a fan splitter with molex/sata power connector. http://www.newegg.com/Product/Product.aspx?Item=N82E16812423166 is fine with 3 or 4 pin fans. With PWM fans, you can still use your motherboard's PWM to regulate fan speed (including max only), but with 3 pin fans you will have them at 100% regardless.

tranngoctan198 · May 7, 2016

basroil :

Hi guy, thanks for your help. I dediced buy NZXT Sentry Mix 2 Fan Controller in Newegg but I have to wonder, whether it My PSU Corsair RM850i can run NZXT Sentry Mix 2 Fan Controller (max 6 Fan is 180w power). This is my System:
My rig:
mainboard: MSI X99 SLi plus
chipset: Intel core i7 5820k
Ram: 32gb DDR4 gskill bus 2400mhz
GPU: EVGA gtx 980ti Classifield
ssd: samsung 120 gb (for OS)
ssd: samsung 500 gb (for install Games)
hdd: Seagate 2TB (for Data)
PSu: Corsair rm850i

SO my PSU can Run NZXT Sentry Mix 2 Fan Controller with 6 Fan at Max Speed
Thank you so much

basroil · May 7, 2016

tranngoctan198 :

Of course, even at the highest power draw your fans won't break 50W put together, so you'll still have a huge margin in case you want to overclock a bit

tranngoctan198 · May 9, 2016

basroil :

thank you guy so much

sos fan help me pls

Commendable

Glorious

Commendable

Glorious

Commendable

Glorious

Commendable

Commendable

Glorious

Commendable

Commendable

Glorious

Commendable

Glorious

Commendable

Glorious

Commendable

Share this page