Hi Guys --
Case: Enthoo Pro
Mobo: Gigabyte Z170X Gaming 7
CPU: i7 6700K
Once I installed the CPU and the CM Hyper 212 EVO, there was a power cable coming off of the CM that I plugged into the "CPU Fan" marked area on the motherboard.
After progressing with the install, I came to the back of the case and its own wiring/cables. There is a cable coming from the back that says "To Motherboard CPU Fan". I believe this is the "PWM Hub".
Now, isn't this what I plugged in earlier? Where does this cable go? There are a number of other slots such as "SYS_Fan 2, or SYS_Fan 3". Is this what it is referring to? The PWM hub almost implies the cable originating from it should be the one that is plugged into "CPU Fan" that is located near the CPU / CM.
If that is the case, does my cable from the CM have to somehow get dragged all the way back to another SYS_Fan outlet?
Sorry for what appears to be a terrible explanation after I re-read it :|
Thank you!
Case: Enthoo Pro
Mobo: Gigabyte Z170X Gaming 7
CPU: i7 6700K
Once I installed the CPU and the CM Hyper 212 EVO, there was a power cable coming off of the CM that I plugged into the "CPU Fan" marked area on the motherboard.
After progressing with the install, I came to the back of the case and its own wiring/cables. There is a cable coming from the back that says "To Motherboard CPU Fan". I believe this is the "PWM Hub".
Now, isn't this what I plugged in earlier? Where does this cable go? There are a number of other slots such as "SYS_Fan 2, or SYS_Fan 3". Is this what it is referring to? The PWM hub almost implies the cable originating from it should be the one that is plugged into "CPU Fan" that is located near the CPU / CM.
If that is the case, does my cable from the CM have to somehow get dragged all the way back to another SYS_Fan outlet?
Sorry for what appears to be a terrible explanation after I re-read it :|
Thank you!
Facebook
Twitter
Instagram