I was recently moving an old computer into a new case and the bios jumper fell of and I couldn't find it I found it the next day and put it back on but no post. the fans spin and keyboards I plug in work. I have tried clearing the cmos and resetting the bios but still no post.
removed bios jumper for too long system won't post
- Thread starter Aldor_
- Start date
hm sure you are using the right pins? maybe the jumper was damaged? mabe you got one just like it on an old hardrive you could check with?
im gonna add, maybe if, it wont work, you could just try to jolt it ot get it to work. like, as you know last ditch effort, you know like sometimes, the board, needs jumped anyway, for some reason.. maybe, you know you could, jolt it, like by when its on just jerk the cord from the wall, flick the power switch while it comes on, y know if the thing completely wont work. sometimes, when something happens to the computer, it needs jumped. my cmoputer the other day, i changed the case, and after the computer stpped booting up. i dint remove anythign. well, i looked over my mb, and one resistor cap had came off. it looked bent over. i didnt do this. pretty sure. but anyway i dontknow what happened, but when i bent the resistor back away from the ram clip, well it came on. but yours, just sat there? right? do somethign to it, if it wont come on. I would, do somethign.. to it to try to get it to jump, so it would need jumped.
SEems like it wont jump or something. I dont know what couldof ahppened to hurt it.
im gonna add, maybe if, it wont work, you could just try to jolt it ot get it to work. like, as you know last ditch effort, you know like sometimes, the board, needs jumped anyway, for some reason.. maybe, you know you could, jolt it, like by when its on just jerk the cord from the wall, flick the power switch while it comes on, y know if the thing completely wont work. sometimes, when something happens to the computer, it needs jumped. my cmoputer the other day, i changed the case, and after the computer stpped booting up. i dint remove anythign. well, i looked over my mb, and one resistor cap had came off. it looked bent over. i didnt do this. pretty sure. but anyway i dontknow what happened, but when i bent the resistor back away from the ram clip, well it came on. but yours, just sat there? right? do somethign to it, if it wont come on. I would, do somethign.. to it to try to get it to jump, so it would need jumped.
SEems like it wont jump or something. I dont know what couldof ahppened to hurt it.
TRENDING THREADS
-
-
-
-
Question I have been stuck between NVMe and SATA SSD. What should I do now?- Started by maniac2556
- Replies: 12
-
Question 1TB HDD 80% Fragmented, Windows 10 Optimise Drives Program Doesn't Help
- Started by sdfbvcxbf
- Replies: 7
-
Question GPU Doesn't output any display when PC is turned on and the fans don't spin either. How do I fix this?- Started by UltiWasTaken
- Replies: 19
-
RTX 4070 vs RX 7900 GRE faceoff: Which mainstream graphics card is better?- Started by Admin
- Replies: 70
Facebook
Twitter
Instagram