S Simoz_ Commendable Apr 25, 2016 3 0 1,510 Apr 25, 2016 #1 Hi. I accidentally disconnected the PLED wires from the power button when I was removing the front panel. I'm about to solder them back, so how can I know which wire goes where?
Hi. I accidentally disconnected the PLED wires from the power button when I was removing the front panel. I'm about to solder them back, so how can I know which wire goes where?
Solution alexoiu Apr 26, 2016 No problem. Just shortly connect them together. If board not starting, connect together the other 2 wires.
No problem. Just shortly connect them together. If board not starting, connect together the other 2 wires.
alexoiu Titan Nov 1, 2012 39,818 249 126,990 Apr 25, 2016 #2 Hi, Position does not matter with Power switch wires. Upvote 0 Downvote
S Simoz_ Commendable Apr 25, 2016 3 0 1,510 Apr 26, 2016 #3 alexoiu : Hi, Position does not matter with Power switch wires. Yes I know, but there are 4 wires altogether, two for the p-switch led and two for the power. Upvote 0 Downvote
alexoiu : Hi, Position does not matter with Power switch wires. Yes I know, but there are 4 wires altogether, two for the p-switch led and two for the power.
alexoiu Titan Nov 1, 2012 39,818 249 126,990 Apr 26, 2016 #4 Try connecting 2 of them and see in what case the board does start. This way you'd identify the p-switch Upvote 0 Downvote
Try connecting 2 of them and see in what case the board does start. This way you'd identify the p-switch
S Simoz_ Commendable Apr 25, 2016 3 0 1,510 Apr 26, 2016 #5 alexoiu : Try connecting 2 of them and see in what case the board does start. This way you'd identify the p-switch Oh, I just figured that the p-switch indicates + and - (in very small print). So I'd suppose those are for the led. . Thanks for the answer Upvote 0 Downvote
alexoiu : Try connecting 2 of them and see in what case the board does start. This way you'd identify the p-switch Oh, I just figured that the p-switch indicates + and - (in very small print). So I'd suppose those are for the led. . Thanks for the answer
alexoiu Titan Nov 1, 2012 39,818 249 126,990 Apr 26, 2016 Solution #6 No problem. Just shortly connect them together. If board not starting, connect together the other 2 wires. Upvote 0 Downvote Solution
No problem. Just shortly connect them together. If board not starting, connect together the other 2 wires.