Hi, I can't get the wired x360 madcatz controller to work. 64 bit windows 7, wired, its plugged into the front port's that are 3.0 but are set at 2.0 at bios, and they worked for it before, but i can swap if that can be an issue for the sake of installing the driver for any reason.
Result wise i can get to http://www.s-config.com/core/wp-content/uploads/2014/04... and having this on the screen, if i turn off automatic windows driver install to get to that page exactly. But when i get to http://www.gamekeysnow.com/blog/wp-content/uploads/2013... I dont have those three listed.
I did however, try going manual, with extracted setup files so the .ini thats in the exe. through Have disk.. and i encounter http://cdn.head-fi.org/f/fb/350x700px-LL-fb9669f9_audio....
If i go through browse folder it says windows has determined the driver software for your device is up to date. I get error 43, and once after some fiddling i had error 21. I reinstalled windows 3 times fully..
Result wise i can get to http://www.s-config.com/core/wp-content/uploads/2014/04... and having this on the screen, if i turn off automatic windows driver install to get to that page exactly. But when i get to http://www.gamekeysnow.com/blog/wp-content/uploads/2013... I dont have those three listed.
I did however, try going manual, with extracted setup files so the .ini thats in the exe. through Have disk.. and i encounter http://cdn.head-fi.org/f/fb/350x700px-LL-fb9669f9_audio....
If i go through browse folder it says windows has determined the driver software for your device is up to date. I get error 43, and once after some fiddling i had error 21. I reinstalled windows 3 times fully..
Facebook
Twitter
Instagram