yes if you install the fan as shown there with the shiny logo like sticker not visible on the inside, you would have intake from the front, pulling air from outside blowing it into teh case ,
because for best cooling and airflow you want front fans to be intake(front fans are usually located lower on the front side) and exhaust fans in the rear/top back
because heat rise, its better and easier to have cool air sucked in the front, the lower the better, and be "dragged" across the computer from bottom to top back
always intake front and exhaust back, roof/top back
so if you cant mount your radiator coolers in the rear or preferably in the top, as exhaust, you have to mount it in the front but as intake
this means that side you see there, need to not be visible, pushed up the front face fan mount hole, so when you look from inside the case and look into the fan blades, you see the concave side of the blade
like looking into a spoon, you want to be able to see that round "scoop" side from the inside, if you mount them on teh front
and if you looking from outside, looking in at teh front you now see the shiny logo like sticker
example. (not your fans, ignore the design/label, pay attention to the blades)
this is teh front of a fan, intake, it sucks air in, looks like the back of a spoon
this is the back of a fan, it exhaust, pushes the air back, note the concave, spoon looking side of teh fan blades